Festool StickFix Rubin-2 6 Inch Discs for RO 150 and ETS 150 Sanders

Festool Rubin 2 Abrasives for the 6" Festool Rotex RO 150 E dual-mode sander and ETS 150/3 EQ and ETS 150/5 EQ random orbital sanders.

The six inch Rubin 2 abrasive discs now feature the next generation Multi-Jetstream design that incorporates a modified (17) hole pattern that increases airflow, and results in even better dust extraction efficiency. In addition, the new pads incorporate an enhanced, heat-resistant StickFix design, extending both pad and abrasive life considerably.

The new Multi-Jetstream design is 100% compatible with the previous pad design, and vice-versa. The new abrasives work seamlessly with the old pads, and the old abrasives are adaptable to the new pads.

StickFix is the Festool brand name for hook and loop (H&L) sandpaper.

1 pk and more

Special Order

Additional shipping charges apply

$13.03 / pk

qty.

The item was added to your wishlist.

The item was added to your shop cart.

Use grits P24 to P60 for rapid removal and rough surface quality. High material removal means low surface quality. This preps surfaces for higher grits.
Use grits P80 to P120 to accomplish intermediate sanding. You will still have a fast removal rate while achieving good surface quality.
Use grits P150 to P180 for finish sanding. Remember that soft wood does not require as fine a sanded finish as hardwood. If you want to sand wood higher than P180, use Brilliant 2 from P220 to

Rubin 2 abrasive was developed for bare natural wood, wood composites and veneers. Rubin has a special coating which sheds wood fibers. Use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products.

Tip

Use coarser grits for faster results; avoid skipping grits for best surface quality. The wood-specific coating for the Rubin abrasives means that they are long lasting.