|Description & Details|
Gelcoat with wax makes the final gelcoat layer cure to a hard sandable finish, with no wax paper or special tools needed.
Gelcoat without wax additive is ideal if you're laying up a mold for a new boat or a fiberglass part where you're laying down the gelcoat first, then applying more layers of resin and fiberglass on top. In this case, you don't want the gelcoat to cure completely.
Neutral gelcoat is better with coloring agents. White is more opaque with coloring agents.
MEKP is included as the catalyst. To thin, use styrene (sold separately).
Available in Quart and Gallon Kits. Wax additive also available for use with gelcoat without wax.
DANGER! Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. Causes damage to organs through prolonged or repeated exposure if inhaled. May be fatal if swallowed and enters airways. Wear protective gloves, protective clothing, eye protection, and face protection. Wash with water thoroughly after handling. Use only outdoors or in a well-ventilated area.
|Number Of Parts:||Two Part|