Get Free Shipping on your order now! Don't miss out!
Quantity
1 ea contains 1 ea

This item is eligible for free shipping
This item will require additional time to ship

Product Details

Blue Sea 8 position toggle DC circuit breaker panel, pre-wired with five circuit breakers with three blank positions (8023) or six circuit breakers with two blank positions(8385) for future wiring additions.

Tech Specs
Item NumberDescriptionVoltageAmperageInstalled 15A Single Pole Circuit BreakersArray
BLU-80238 Position12/24V100A5Vertical
Info & Guides

Technical Information

  • All positive, negative and grounding buses installed, fully pre-wired
  • Panels with meters include toggle switch for mounting up to 3 battery banks
  • All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  • All circuit label positions are backlit on standard panels - No kit required
  • "ON" indicating LEDs installed in all circuit positions
  • MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  • Two-part polyurethane slate gray finish
  • Heavy 1/8" aluminum 5052 alloy
  • Industry standard height and width
  • Countersunk mounting holes throughout
  • Detailed installation instructions and cutout template included
  • Includes set of 30 common Large Format Panel Labels
  • Over 500 individual labels available
  • Width Inches (mm): 5.25 (133.35)
  • Height Inches (mm): 7.50 (190.50)

Reviews for Blue Sea Systems 8 Position Toggle DC Circuit Breaker Panel

2 of 2 Reviews

July 21, 2015

You get what you pay for, Top Quality!!!!!!!!!
By Cowboy from Erie, MI Lake ERIE

Verified Purchase

The old saying of you get what you pay for, this is top Quality!!! I replaced my old fuse panel in my boat with this new breaker panel. My old fuses would get corrosion on them the would not be blown but they would not work!! I would have to turn the fuse in the holder to get it to work, not a good thing when you boat on the great lakes and your electronics dont work.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

July 7, 2013

Installation requires care
By Captain Paul from Minneapolis

As with all Blue Sea equipment I have installed, the design and craftsmanship is superb. The printed manual that explains the electrical intricacies of installing the panel is excellent. I have found that cutting the hole for Blue Sea panels, however, is a little awkward and requires care. Very little clearance is provided between internal components and the hole's edge, and the tabs one leaves for the mounting screws are rather small (1/4 inch by 1/4 inch). The provided template is good, although it shows the mounting screw centers as 4.420 inches or 112.27 millimeters apart -- numbers only an engineer could dream up. Cut the paper template apart with a razor knife or Exacto, rather than a scissors, for best results.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?