By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
Does the Measurement include the end connectors or just the cable run between them?
Asked on 07/14/2015 by Grant ThelenNot sure, I purchased a unit which measured longer than I thought I would need so I did'nt actually measure the cable.
Answered on 07/15/2015 by MARTIN WAGGONERTotal length of the cable including the ends.
Answered on 07/15/2015 by Rick WhiteThe length of the cable includes the end connectors.
Answered on 07/15/2015 by JOHN CURNALWhat is the preference with the two Teleflex cables? (Red and Black versions).
Asked on 06/02/2015 by Gregg StrangwaysI purchased the black cables for the throttle and shift controls on the binnacle on my sail boat. Very smooth operation even with several rather tight directional changes. I recommend these highly.
Answered on 06/04/2015 by MARTIN WAGGONERSorry wasn't even aware there is red and black versions... So I can't really answer the question. I got black ones, and like them a lot!
Answered on 06/02/2015 by JOERG KIESOWI have the black version, and bought tfxtreme cable because my kicker was eating shift cables every other year. The new cable shifts very smoothly
Answered on 06/02/2015 by AARON VARLANDAre the threaded ends on both sides 10-32? I don't see it in the description. Thanks
Asked on 01/06/2017 by Ernest MYes, both ends are 10 - 32 threads.
Answered on 01/06/2017 by Rick WhiteIt's a while that I put them in my boat, but I am pretty confident. Yes, 10-32 on both ends. You can also check seastarsolutions dot com. JD doesn't let me post the link here. Look for "Control Cables", they have a pdf...
Answered on 01/06/2017 by JOERG KIESOWwhat type of terminations does the cables come with? Im looking for a gear shift cable for a 1977 travel queen motor home with a dodge chassis
Asked on 04/09/2015 by Tim Cookmy old cable has threads at one end but the other end is made into the cable with a small flattened end with a small eye in it
Answered on 04/13/2015 by Tim CookThese cables are supplied with a "standard" (not fine) male thread on both ends with a jamb nut. Use the existing connectors off of the old cable.
Answered on 04/09/2015 by MARTIN WAGGONERWill this cable replace a volvo 4.3penta steering cable?
Asked on 07/27/2017 by Kelley from GaNo, this is a control cable for shift and throttle.
Answered on 10/17/2017 by JD Tech TeamBy signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy