Get Free Shipping on your order now! Don't miss out!

SHURflo Pro Blaster II Washdown Pumps

$245.39In StockSee Product Details
PROBLASTER II DELUXE 4.0 and ULTIMATE 5.0

This item is eligible for free shipping

Product Details

Shurflo's all new PRO BLASTER II Washdown Pumps feature 60 psi shutoff pressure as opposed to the old pump's 45 psi. The ProBlaster II retains the same fuse/breaker requirements. The new Pump's footprint is identical to its predecessor for seamless retro fit. The Pro Blaster II still features the famous seamless can/electro coated motor with o-ring sealed end bells and water proof switch housing. All wire entries are completely sealed to keep water out. The PRO BLASTER II Washdown Pumps are ignition protected and feature thermal breakers. These pumps will self prime vertically up to 6 ft. They now also include fittings and a twist on inlet strainer. 2-Year Warranty.

Tech Specs
PART # SHU-4248-153-E09 SHU-4248-163-E09 SHU-4258-153-E09 SHU-4258-163-E09
NAMEPRO BLASTER DELUXE II 4.0 12 VDCPRO BLASTER DELUXE II 4.0 24 VDCPRO BLASTER II ULTIMATE 5.0 12 VDCPRO BLASTER II ULTIMATE 5.0 24 VDC
VOLTAGE12 VDC24 VDC12 VDC24 VDC
DIMENTIONS10" x 5.0" x 4.75" (254 x 127 x 120mm)10" x 5.0" x 4.75" (254 x 127 x 120mm)10" x 5.0" x 4.75" (254 x 127 x 120mm)10" x 5.0" x 4.75" (254 x 127 x 120mm)
FLOW RATE4.0 GPM (15.1 LPM)4.0 GPM (15.1 LPM)5.0 GPM (18.9 LPM)5.0 GPM (18.9 LPM)
AMPS [MAX.]10.05.014.07.0
SHUT-OFF PRESSURE60 PSI (4.1 BAR)60 PSI (4.1 BAR)60 PSI (4.1 BAR)60 PSI (4.1 BAR)
Info & Guides

Technical Information

  • FEATURES
  • THERMALLY PROTECTED
  • IGNITION PROTECTED
  • SELF-PRIMING
  • BUILT-IN CHECK VALUE & THERMAL OVERLAND
  • CAN RUN DRY WITHOUT DAMAGE
  • 2-YEAR WARRANTY

Reviews for SHURflo Pro Blaster II Washdown Pumps

1 of 1 Reviews

February 23, 2012

Great Pump, but....
By Captain Chip from Shallote, North Carolina

The pump came with what appeared to be standard thread protectors inserted into both the intake and output side. This led me to believe both sides were threaded and would accept standard threaded nipples. Unfortunetely the pump inlet and outflow are not threaded and will not take a standard threaded nipple to attach barbed hose connections to. Instead, you also have to order 2 other parts which can only come from Shureflow in order to install the pump.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?