Free shipping on orders over $99.99! Don't miss out!
$10.65 In Stock
Seachoice Flush Pull Ring
$10.65In Stock
Seachoice Flush Pull Ring
Ask a Question
3
Based on 1 Reviews
  • 5 Star

    0%

  • 4 Star

    0%

  • 3 Star

    100%

  • 2 Star

    0%

  • 1 Star

    0%

Seachoice Flush Pull Ring Customer Questions and Answers

4 of 4 Questions

Question

Can this item be secured into a tempered glass door to a wine cellar? (floor mounted)

Asked on 10/24/2012 by Undisclosed

Top Answer

I don't think so. The "cup" for the ring is about 3/8" deep. You would have to drill a hole in the glass. I don't think you can drill tempered glass.

Answered on 10/25/2012 by STEVE BRODBECK
See More Answers (4)

Answer

I don't think so. Proper mounting requires chiseling out the substrate so it sits flush.

Answered on 10/24/2012 by TIMOTHY MURPHY

Answer

Without seeing exactly what you have in mind and the information you gave I would say no. Your glass provider would be helpful in that and maybe have some ideas. If the glass is set in a frame (like a door) then there may be possibilities.

Answered on 10/24/2012 by PATRICK MEYERS

Answer

Doubt you will find anyone to put the holes in the glass.

Answered on 10/25/2012 by JAMES DEWEY

Answer

This is more of a glass question. There is no doubt the required holes and relief opening could be made into material. As I don't know anything about tempered glass I don't know if the holes and relief opening can be made in it. If they can then there would have to be some soft plastic between the metal parts and the glass (both the screws and handle) to kept it from point loading and fracturing the glass

Answered on 10/24/2012 by CHRIS METHOT
Answer Question

Question

I'm looking for a flush ring pull to lift up a crawl space hatch. Is this strong enough? If not, do you have any suggestions?

Asked on 02/06/2012 by Treacy L

Top Answer

This ring will work but you must use longer screws.

Answered on 02/28/2012 by JOSEPH LANGE
See More Answers (3)

Answer

It will be fine. Depends on the length of the wood screws used and the material into which they are screwed. The ring is strong.

Answered on 02/06/2012 by CHRIS METHOT

Answer

I just purchased 4 of these to replace ones that are already in place. I have yet to install them but after inspecting them they seem strong enough to lift up my engine hatch covers that are quite large. The only problem that I can see is that the ring may be a little difficult to get hold of as there is no finger relief to pick up the ring. Other than that I expect them to work fine. Patrick

Answered on 03/09/2012 by PATRICK MEYERS

Answer

Seems plenty strong, but you must supply your own screws. I believe we used #10 x 1".

Answered on 02/06/2012 by TIMOTHY MURPHY
Answer Question

Question

what are the dimensions

Asked on 02/02/2021 by GARY from ME

Top Answer

It depends on which one you want. The dimensions are listed under the tech specs tab, next to the product description.

Answered on 02/03/2021 by Paul
Answer Question

Question

what is router depth of this item?

Asked on 11/13/2011 by Undisclosed

Top Answer

There are 3 answers to that. The square portion you see in the picture is 1/8". The round recess the ring is in when flush is 5/16". The small portion of the ring that is on the other side of the hinge sticks out to a total of 3/8" when the ring is extended 90 degrees.

Answered on 12/30/2011 by CHRIS METHOT
Answer Question
1 of 1