This item is eligible for free shipping
This item will require additional time to ship
Whale Gusher 10 high specification bilge pumps have a worldwide reputation for efficiency, reliability, and high output of 17 gallons per minute. Self-priming with light, easy motion. Ideal for medium sized yachts. They are easy to install and provide instant access to all parts.
Lanyard secures removable handle. Also suitable for fuel transfer and some solvents (verify compatibility prior to such use). Can empty 54 gallon drum in less than 3 minutes. Anodized diecast alloy, epoxy resin coated with synthetic rubber and stainless steel. Hose is 1-1/2" bore.
Item # | Description |
---|---|
WHA-BP3708 | Standard-On-Deck |
WHA-BP3740 | Thru-Deck |
WHA-AK3706 | Complete set of serviceable parts for G10, Mk2, Mk3 (neoprene) |
WHA-AK3714 | Complete set of serviceable parts for G10, Mk2, Mk3 (nitrile) |
WHA-AS3719 | With bushed eyebolt and clamping plate assembly |
WHA-AS3723 | Outlet Valve Plate Assembly, (suitable for mark 3 only) |
WHA-AS4405 | Spare Handle |
WARNING: These products may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Reviews for Whale Gusher 10 Bilge Pump
Paint delamenates from the aluminium and defeats seals causing pump to stop working completely. I replaced the pump with exact same model and after 3 or 4 years had same failure, Whale does not respond to emailes.
Was this review helpful to you?
Verified Purchase
It is still grate
Was this review helpful to you?
All parts fit except that my pump was so old that I needed to rethread all of the screw holes and replace them with slightly larger ones -- anyway the pump when reassembled works - however I will replace the whole unit in the near future before going on a long cruse.
Was this review helpful to you?