December 20, 2019

Verified Purchase

Used on hinges for compartments. Replaced a counter sunk barrels which had a copper component. Hoping this all SS item will resist corrosion.

June 29, 2015

Verified Purchase

Knowledgeable people on the phone... a big plus!

June 13, 2015

Verified Purchase

good price for stainless fasteners

January 30, 2015

Verified Purchase

The reviews sum them up precisely. Very difficult to start threading but they otherwise feel and look very nice. Needed 36 of them to fasten pergola beams sandwiched around 4" galvanized pipe with 3 sections of all-thread through each. Bought ten to see how they looked and will have no reservations going back for the rest. (Gonna hurt to pay the hefty shipping twice though :(

July 24, 2014

Verified Purchase

They are stainless , they won't rust.

December 31, 2013

Got them to install ports

October 7, 2013

Verified Purchase

Product is great. Shipp[ing cost for such a small order was excessive

June 17, 2013

The potential of this product is outstanding. Unfortunately, the nuts are extremely difficult to begin threading them on the bolt. They must be aligned perfectly before they will start without cross-threading. Also, extreme care must be used to insure the bolt hole is drilled perpendicular to the surface the nut will be snugged to, otherwise only one edge will be in contact with the surface. Would be adviseable to use a flat washer to prevent nut edge from biting into the surface.

February 21, 2012

i got these to act as an accorn nut but with better securety and protection with the benefit of using a tool to fasten and unfasten. some of you are wondering the diameter of the head as i was. i ordered some and this is what i messured with a ruler (not procise but close enough)the 1/4 20 interior thread nut has a head with a 11/16" diameter and the height of 3?16"... the #10 24 interior threaded nut has a head diameter of 9/16" and height of head is about 1/8" each size interior threads are nearly the length of the entire barrel. whatever bolt you screw into these nuts should contact about 1/16" shorter or more than the length of the barrel. the head diameter really helps destribute the pressure of the bolt and nut. the bottom of the head of the barrel nut has a band of small teeth that help to hold the nut in place and resist loosening. these ratcheting like teeth was something i was not expecting but was extrememly happy about. only con(s) is that i wish measurements like this were in the stats and that these pieces could be ordered in various barrel lengths. but this is more of a selection and ordering info complaint. Shipping by the way was quick. the product only amazes

March 4, 2011

Would love to have bought the matching screws but I didn't need 200 of them. Wish you could sell screws etc. in smaller pkg. size, everything else about your products is super.