Get Free Shipping on your order now! Don't miss out!

This item is eligible for free shipping

Product Details

Pro-Set Adhesives by Gougeon Bros are pre-thickened, two-part epoxy adhesives formulated for secondary bonding of laminated composites as well as steel, aluminum, cast iron, concrete, stone, and most wood species. PRO-SET Adhesives will bond these materials, to themselves, or to one another in any combination. This versatility fits the requirements of the marine and composites industries, as well as the architectural, transportation, and civil engineering fields.

Choose from Fast (ADV 175/273), Medium (ADV 175/275), or Slow (ADV 175/277) cure rates. Each dual cartridge includes 1 Pro-Set static epoxy mixing wand (300MW).

Additional mixing wands available 6/pk (sold separately).

This product is for Professional use Only!

Tech Specs
Handling Properties 175/273 Fast Cure Rate 175/275 Medium Cure Rate 175/277 Slow Cure Rate
Pot Life (100g) @ 72°F 9-11 minutes 27-33 minutes 45-55 minutes
Working Time, 1/2'' Bead @ 72°F 20 minutes 30 minutes 2-1/2 hours
Clamps Off Cure Time @ 72°F 3 hours 8 hours 16 hours
Minimum Cure Temperature 45°F 65°F 65°F
Mechanical Properties 175/273 Fast Cure Rate 175/275 Medium Cure Rate 175/277 Slow Cure Rate
Compression Yield 10,700 psi 11,900 psi 11,800 psi
Tensile Strength 6,250 psi 7,260 psi 7,070 psi
Tensile Modulus 3.80E+05 4.20E+05 4.20E+05
Tensile Elongation 4.2% 4.2&337; 4.4%
Flexural Strength 11,100 psi 11,900 psi 12,100 psi
Flexural Modulus 3.70E+05 4.10E+05 4.00E+05
Lap Shear on 2024T Aluminum 1,830 psi 1,990 psi 1,980 psi
Lab Shear on 1018 Steel 2,280 psi 2,330 psi 1,980 psi
Tensile Adhesion to 2024T Aluminum 1,420 psi 1,760 psi 1,720 psi
Tensile Adhesion to 1018 Steel 2,540 psi 2,830 psi 2,580 psi
Hardness, Type D 82 82 84
Info & Guides
Pro-Set Adhesives
Pro-Set 175 Resin with Hardener. 175 Resin with Hardener is a cost effective, excellent multi-purpose adhesive for this wide range of materials. Resins and hardeners are thixotropic pastes. The mixture fills gaps easily, and will not sag on vertical surfaces. The material aggressively wets out the substrate, making priming or pre-wetting unnecessary on most surfaces, while ensuring a good bond.

Coverage: One cartridge set dispenses approximately 47 ft. of 1/4" bead, or 17 ft. of 1/2" bead, and will cover approximately 7 sq. ft. when spread with a 1/8" x 1/8" notched spreader, or 12 sq. ft. with a 1/16" x 1/16" notched spreader.

Shelf Life: When stored in temperatures of 65-85°F, shelf life is 18 months for the resin, and 18 months for the hardener.


Please read all instructions and safety information on the label and in the SDSs (safety data sheets) before use. Wear safety glasses with side shields or chemical splash goggles, wear liquid-proof, chemical-resistant gloves (nitrile-butyl rubber, neoprene, butyl rubber or natural rubber), and full body-covering clothing. Use with adequate general ventilation and/or local ventilation to keep exposures below established limits.

When ventilation cannot be made adequate enough to keep exposures below established limits, use a NIOSH-approved respirator with an organic vapor cartridge, or organic vapor cartridge + P100 particulate filter, depending on specific workplace conditions. Consult with your respirator and cartridge supplier to ensure proper selection of respirator and cartridge based on ingredients listed in Section 3 and specific workplace conditions. Use and select a respirator according the guidelines established in OSHA 1910.134 or other applicable respiratory protection standard.

Reviews for Pro-Set Adhesives

2 of 2 Reviews

June 10, 2020

Great stuff
By Outlaw airplane builder from Richland WA

Verified Purchase

We use this to bond carbon fiber panels to structural ribs. Really love the non sag and the working time. Just wish it would come with a couple extra mixing tips. We end up just mixing And applying by hand.

Strong stuff
Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

July 19, 2013

Perfect Application
By Senior Engineer- Junior from Grand Rapids, MI

Verified Purchase

Application, set times and strength were all as advertised. The adhesive made a very difficult project successful.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?