Free shipping on orders over $99.99! Don't miss out!
$3.92 In Stock
Brass Wood Screws Flat Head Phillips
$3.92In Stock
Brass Wood Screws Flat Head Phillips
Ask a Question
5
Based on 5 Reviews
  • 5 Star

    100%

  • 4 Star

    0%

  • 3 Star

    0%

  • 2 Star

    0%

  • 1 Star

    0%

Brass Wood Screws Flat Head Phillips Customer Questions and Answers

7 of 7 Questions

Question

Is it possible to purchase bronze wood screws in less than 100 count per box?

Asked on 06/07/2015 by Charles Allin

Top Answer

Great product but comes 100ct box

Answered on 06/08/2015 by SPENCE MIDDLETON
See More Answers (2)

Answer

I primarily use brass since my projects aren't exposed to salt water conditions. I've purchased small quantities of brass screws at a local hardware store and at Lowes, Menards, etc. You may find small quantities of bronze screws which are supposed to better for salt water at similar outlets.

Answered on 06/08/2015 by JOSEPH ZWACK

Answer

I wish I could help, but I needed a whole box. For smaller quantities try your local hardware store.

Answered on 06/08/2015 by DARRELL POOLE
Answer Question

Question

I am looking for #3-inch wood screws which would fit standard door hinges and strike plates. What would you suggest? Thanks for a reply!

Asked on 02/16/2012 by James Edward Williams II

Top Answer

That is an odd size combination for door hinge screws. We buy 10 gauge x 1 1/4" screws. Lock strike plates can take various size screws but the most common size would be 8 gauge x 1 ". I should point out that I am in Australia but most of our hardware is the same as you would find in the US

Answered on 02/17/2012 by DAVID APPS
See More Answers (2)

Answer

Hi- I am a woodworker and an owner of a 1948 wooden boat so I am constantly on the 'prowl' for hardware and fasteners for projects. I find that often times I end up looking first at Jamestown, and finally ordering from them. Their quality is a lot better then most places and customer service is tops. I'm not sure why you are using 4" screws on a door hings unless it is a replacement and the whole is already enlarged. I would pre-drill and use a product like akempucky (or paraffin or soap) to pre-lubricate. If you are able go for something other then a slot head to get a better set to the screw. I hope this info helps! nate bacon Waynesboro, PA

Answered on 02/21/2012 by NATHAN BACON

Answer

Suggest you use stainless steel brass is to soft for this purpose

Answered on 02/17/2012 by ROBERT GULDEMOND
Answer Question

Question

what is the tensile strength of a no. 6 brass screw, ca it hold 25 lbs. on a wall or more?

Asked on 12/24/2013 by John Shomaker

Top Answer

Absolutely, and especially if you are driving the screw head tight to the material you want to hold in place.

Answered on 01/19/2014 by MICHAEL CLAUDON
See More Answers (1)

Answer

Yes, if inserted into a wall that is adequate.

Answered on 12/25/2013 by JAMES ZIMMER
Answer Question

Question

Do you have threes screws in 1 1/4 and 1 1/2 inch?

Asked on 08/11/2013 by Undisclosed

Top Answer

Yes

Answered on 08/11/2013 by MICHAEL ROSENDAHL
See More Answers (1)

Answer

Yes

Answered on 08/11/2013 by LOREN MILLIGAN
Answer Question

Question

Hello, Can you please advise if you have in stock 200 solid brass wood screws 6g x 3/4" phillips head or 200 6g x 3/4" slotted countersunk wood screws. Can you email me a quote including freight to Western Australia postcode 6009.

Asked on 07/14/2018 by Kerry from WA

Top Answer

We have roughly 6000 of the phillips and 3600 slotted in stock. I have passed this onto our sales team.

Answered on 07/16/2018 by JD Tech Associate
Answer Question

Question

What does # 4 or # 8 mean -- a way to measure diameter of shank? thanks, D.

Asked on 09/16/2012 by David dodhner@msn.com

Top Answer

Hello David, I believe the 'screw number' is relative to both diameter and shank. On the JD website you can search the type of screw you need and on the lower left side of page - click "how to's" (wood screw sizing). It's a very comprehensive list of screw numbers VS actual dimensions.

Answered on 09/17/2012 by JAMIE DIMICK
Answer Question

Question

Is the first number 4 x 3/8 the length in inches?

Asked on 01/24/2012 by Undisclosed

Top Answer

The first number is the width of the screw. The second number is the length.

Answered on 01/25/2012 by Ryan L
Answer Question
1 of 1