The White Roller Covers have a solvent resistant core designed for enamel paints, epoxy, fiberglass resins, bottom paints and most marine finishes.
The Smooth 1/4" Nap is ideal for the application of a fine finish.
Smooth roller covers (with a 3/16" or 1/4" nap) are used for painting walls, floors and fine finishing.
The White Roller Covers are available in 3 inch, 7 inch and 9 inch lengths.
October 12, 2015
These rollers shed small hairs profusely. It ruined my final coat of Interlux brightside. Do not use this product under any circumstances.
May 14, 2010
This left tons of hair all over my gelcoat. The first coat went on OK and only came apart a little towards the end (solvent must have finally gotten at it) but the second coat was a nightmare. Since the first coat was laminating gelcoat (as it should be) the surface was tacky for the second coat and ripped the wimpy hairs right off of these rollers. Utter waste of money. Falls to pieces rolling Interlux Epoxy primers too, so honestly I don't know where these _would_ work out for you.
August 24, 2008
rollers left fibers in the finish. Not good. We used lambs wool 1/4 inch nap rollers with best results.