Get Free Shipping on your order now! Don't miss out!

This item is eligible for free shipping

Product Details

These reducers are the standard component to be used with most AwlGrip Epoxy primers when using a spray application. *** FOR PROFESSIONAL USE ONLY ***

Info & Guides
Theoretical Coverage: Sq. Feet/Gallon: 497 Sq. Feet at one mil dry. 165-248 Sq. Feet at recommended dry film thickness. Calculated for mixed base and converter, reduced 25%. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage will vary according to equipment choice, application techniques, part size, and environment.

T0006 is a primer reducer, a standard epoxy reducer for spray application of 545 Primer, Awl-Quik, sprayable fairing compound, 30-y-94, and high build epoxy primer. Also recommended for Hullgard Epoxy Primer.

Technical Information

  • Recommended Wet Film Thickness: 7-10 mils (175-250 microns) 2 to 3 coats.
  • Recommended Dry Film Thickness: 2-3 mils (50-75 microns).
  • Recoatability: At 77°F/50% R.H. Spray: minimum with itself 1 hour, with other products 12 hours.
  • Brush Roll: with itself 12 - 14 hours, with other products 12 - 14 hours.
  • Maximum without sanding 24 hours. Sanding is recommended to improve adhesion and appearance.
  • Overcoat with AWLGRIP®/AWLCRAFT® 2000 Topcoats, HIGH BUILD Epoxy Primer, AWL-QUIK® Sanding Surfacer, ULTRA-BUILD® Primer, HULL-GARD® E.R., and HULL-GARD® W.B.
  • VOC: 850 g/lt or 7.1 lbs/gal