This item is eligible for free shipping on orders over $99.99
Interlux Fiberglass Solvent Wash 202 is a combination of several solvents, some of which are very slow to evaporate from the surface of gel coat being wiped. This characteristic is very important because the wax contaminants must stay in solution so that it can be wiped from the surface before it dries. 202 Solvent wash is also an excellent parts clean up and multi-purpose wipe down solvent.
Use before painting bare fiberglass gel coats. This solvent removes mold release agents, wax, oil, and grease. Leaves a properly cleaned surface for optimal paint adhesion. 202 Solvent is also used for cleaning painting tools.
Available in Quart and Gallon sizes.
Method Wipe a small area with a clean rag that has been wetted with Fiberglass Solvent Wash 202. While the surface is still wet, wipe with a clean, dry rag. Continue this process until the entire surface has been cleaned. Rinse with fresh water. If water beads up or separates, wipe the surface again with Fiberglass Solvent Wash. When the water sheets off, all contamination has been removed. Do not paint until surface is clean and dry.
Compatibility/Substrates For use on Fiberglass and Painted Hull Surfaces that are being prepared for repainting with Interspray Finish Coats.
TRANSPORTATION,STORAGE AND SAFETY INFORMATION
TRANSPORTATION: Fiberglass Solvent Wash 202 should be kept in securely closed containers during transport and storage.
STORAGE: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Fiberglass Solvent Wash 202 to be realised ensure that between use the container is firmly closed and the temperature is between 5 deg C/40 deg F and 35 deg C/95 deg F. Keep out of direct sunlight.
Safety DISPOSAL: Container Disposal: Triple Rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by other procedures approved by state or local authorities.
WARNING: Cancer - www.P65Warnings.ca.gov
May 2, 2014
Great for fiberglass prep prior to painting
May 15, 2010
This is some awesome stuff! Very powerful and does what it says! Highly recommend this!!
April 10, 2010
great product. cleaned old wax and dirt off fiberglass finish on my boat.
May 1, 2008
I was using this product to prep a hull for boot-stripe paint. The stern of my boat has a 3" thick vinyl rub-rail which had 10+ years of stain and mold that had resisted all vinyl cleaners I had tried. While removing wax from the hull, the solvent accidentally touched the vinyl and, voila, cleaned it back to white where it touched! I used it to restore the whole piece of vinyl to like-new condition in just a few minutes, and it did not leave the vinyl sticky. An unexpected bonus from a good product.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.