This item is eligible for free shipping
Awlgrip Pro-Cure Accelerators may be added to AwlGrip and AwlCraft 2000 Topcoats to reduce dry and cure times to as little as 1-2 hours, streamlining the application process. Pro-Cure X-98 and X-138 are additives used in Awlgrip and Awlcraft 2000 topcoats only. DO NOT USE IN PRIMERS. *** SUGGESTED FOR PROFESSIONAL USE ONLY ***
| Temp (F) | Reducer | Pro-Cure Accelerator | Dry Time (Hrs) | Application Life (Hrs) |
|---|---|---|---|---|
| 100 | T0005, T0002 | None | 18-20 | 6-8 |
| 90 | T0001 | X-138/X-98 | 3-4/1-2 | 2-3/1-2 |
| 80 | T0003 | X-138/X-98 | 4-5/2-3 | 4-5/1-2 |
| 70 | T0003 | X-138/X-98 | 11-12/4-5 | 6-7/2-3 |
| 60 | T0001 | X-138/X-98 | 12+/6-7 | 6-7/3-4 |
Surface Preparation - Additive component. Refer to the primary product application.
Mixing and Reduction - Pro Cure X-138 73015. 1 liquid ounce per 2 gallons of mixed topcoat color base and coverter. This is the maximum amount; lesser quantities may be sufficient. This is equivalent to 6 capfuls if measured using the screw top cap.
Application Instructions - Pro Cure X-138 may be used in both spray and brush applications. Recoatability: Awlgrip Topcoats with a full add of Pro-Cure X-138 may be recoated or taped in 6 to 8 hrs at 77 F/50% RH. Do not apply to surfaces warmer than 105 F or colder than 55 F, or attempt to cure at temperatures below 55 F.
Note: Accelerators are not recommended above 85 F. Doing otherwise could impair performance.
X-138: 1 liquid ounce per 2 gallons of catalyzed topcoat adding reducer.
Technical Information
- Type: Accelerator additive
- Packaging: 2 ounce bottles/12 per case
- PRO-CURE#174 X-98 and PRO-CURE#174 X-138 are additives used in AWLGRIP#174 and AWLCRAFT#174 2000 Topcoats.
- Mixing and Reduction: PRO-CURE#174 X-98 (73014) 1/2 liquid ounce per 2 gallons of mixed topcoat color base and converter.
- This is the maximum amount; lesser quantities may be sufficient.
- PRO-CURE#174 X-138 (73015) 1 liquid ounce per 2 gallons of mixed topcoat color base and converter.
- This is the maximum amount; lesser quantities may be sufficient. Induction Time after Mixing: N/A
- PRO-CURE#174 X-98 should only be used in spray applications.
- PRO-CURE#174 X-138 may be used in both spray and brush applications.
- Recoatability: AWLGRIP#174 Topcoats with a full add of PRO-CURE#174 X-98 may be recoated or taped in 4 to 6 hours at 77#176F, 50% R.H. AWLGRIP#174
- Topcoats with a full add of PRO-CURE#174 X-1
- VOC: 73015 - 951 g/lt or 7.9 lbs/gal 73014 - 888 g/lt or 7.4 lbs/gal
