This item is eligible for free shipping
This item will require additional time to ship
The Tie Down Engineering Galvanized Connector Pin Set is used to connect Male and Female T Connectors. The Quick disconnect Connector Pin Set consists of a Galvanized 3/4" Connector Pin and Hitch Clip Pin.
Use with the Galvanized Male and Female T-Connectors (Item Nos. TIE-26532 or TIE-26408; TIE-26528 or TIE-26407) to attach hinged dock fingers and ramps.
Use with the Galvanized Outside Corner Male and Female T-Connectors (Item No. TIE-26522 or TIE-25491; TIE26528 or ITE-26407) to attach hinged dock sections end-to-end.
Tie Down Dock Hardware is available in both Standard Grade (3/16") and Commercial Grade (1/4") hot-dip galvanized steel for corrosion resistance and long life.
Tie Down Dock Hardware is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" Galvanized Carriage Bolts. All Male and Female dock-to-dock hinged connections are made with either 3/4" Galvanized Bolts with lock nuts or 3/4" quick disconnect Galvanized Connector Pins (Item No. TIE-26531).
The Tie Down Dock Hardware Building Plans will provide you with several designs for building a lightweight and long lasting floating dock system.
(See the "Links" tab above for a pdf copy of the Dock Hardware Building Plans.)
