The Tie Down Engineering Galvanized Outside Corner End is used at the ends of fingers, docks, and at the corners of swim floats & ski jumps. The Outside Corner End measures 10 inches long on each leg and is 5 inches high.
The Outside Corner End fastens to the corner of the dock with eight (8) 3/8" Galvanized Carriage Bolts. Use with the Galvanized Inside Corner (Item No. TIE-26524 or TIE-26403) to provide for sturdy dock construction.
Tie Down Dock Hardware is available in both Standard Grade (3/16") and Commercial Grade (1/4") hot-dip galvanized steel for corrosion resistance and long life.
Tie Down Dock Hardware is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" Galvanized Carriage Bolts. All Male and Female dock-to-dock hinged connections are made with either 3/4" Galvanized Bolts with lock nuts or 3/4" quick disconnect Galvanized Connector Pins (Item No. TIE-26531).
The Tie Down Dock Hardware Building Plans will provide you with several designs for building a lightweight and long lasting floating dock system.
(See the "Links" tab above for a pdf copy of the Dock Hardware Building Plans.)