This item is eligible for free shipping
Interlux 2333N Reducing Solvent is a slow evaporating solvent to be used when brushing or rolling specific two-part polyurethanes and epoxy paints. In general, 2333N is most commonly used when brushing Interlux Perfection.
Method Refer to the specific product directions for the amount to be used.
Compatibility/Substrates For use with two-part polyurethanes and epoxy paints.
TRANSPORTATION,STORAGE AND SAFETY INFORMATION
TRANSPORTATION: Reducing Solvent 2333N should be kept in securely closed containers during transport and storage.
STORAGE: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Reducing Solvent 2333N to be realised ensure that between use the container is firmly closed and the temperature is between 5 deg C/40 deg F and 35 deg C/95 deg F. Keep out of direct sunlight.
DISPOSAL: Container Disposal: Triple Rinse (or equivalent). Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill or by other procedures approved by state or local authorities.
WARNING: Cancer - www.P65Warnings.ca.gov
January 18, 2023
I mistakenly got 333N from a local supplier and it ruined my paint... this mixed well and thinned... though I will say it greatly increased the dry time.
July 29, 2019
Good stuff to thin great paint Interlux Perfection
February 18, 2019
This stuff is fantastic. Ridiculously expensive, but great.
July 7, 2015
This is a must have for thinning 2-part linear polyurethane paints such as Perfection. Three coats covered my 11' PT11 nesting dinghy beautifully. Each coat used 1.3 oz. of the thinner. I've got LOTS of 2333N left over. Perfection is absolute magic for its easy, roll on "spray booth" glossy finish.
April 20, 2014
don't even attempt to paint on a warm day without 233n, keeping wet edge is sometimes tricky, two people make finish better, one rolls one tips
November 1, 2009
This is really good stuff. Used it to clean the rails prior to applying Cetol Natural Teak and Marine Gloss. I like to leave my brushes in it - it doesn't evaporate and keeps the brushes soft, clean and pliable.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.