This item is eligible for free shipping on orders over $99.99
Awlgrip T0115 Awlprep Plus Wax & Grease Remover is used to remove wax residue and grease from substrates. A medium-fast evaporating, strong, solvent designed to remove waxes, oils, and greases commonly found on painted surfaces, new or aged gelcoat, aluminum, or steel. Use before and after sanding the substrate prior to priming. Always dewax before sanding. Do not use on freshly applied primers or topcoats. It is photochemically reactive.
Surface Preparation - A clean, dry surface is essential to the success of any coatings application. Remember to clean before sanding. Sanding often melts greases and oils into the surface, making it difficult to obtain a clean surface.
Care should be used when wiping primed or painted surfaces which are not fully cured. Awl-Prep wipe down products can attack an epoxy or urethane coating as well as some polyester fillers which are not yet fully cured. Usually an epoxy or urethane surface which be sanded is cured enough to be wiped down with Awl-prep surface cleaning solvents, but not de-waxing or degreasing solvents. Polyester fillers are often sensitive to the types of solvents in the AWL-PREP product line. Always check a small area before beginning the two cloth method on a primed or topcoated surface.
Detergent Scrubbing - Many applicators scrub the surface they are goin to paint with household cleanser and a 3M Scotchbrite Pad before any other prep work is performed. This is an excellent practice as careful observation of the rinse water will tell you when you have a clean surface. Breaks, holes, or beading of the rinse water indicate area which need additional cleansing.
Application Instructions - Two Cloth Cleaning Method.
Surface should be clean of all dust. Use a vacuum to removed ust or use clean dry compressed air to blow while wiping with clean, oil free, dry cotton cloths. A majority of dust and dirt should be removed before wiping down with an Awl-prep wipe down solvent.
Soak one cloth in the Awl-Prep solvent. Wet the surface with this cloth.
Use a dry second cloth to wipe the surface dry and lift the contamination off the surface. Work in small areas (4 sq m or less) to keep the surface cleaner from drying before the second rag wipes the surface clean and dry. Repeat until surface is residue free.
Warning Wiping with one wet cloth only smears contamination around. Be sure cloth used is clean. Surface must be dry before using tack rags.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.