Get Free Shipping on your order now! Don't miss out!

Awlgrip Additive Flattening Agent G3013

$66.16In StockSee Product Details
Awlgrip Additive Flattening Agent G3013
Quantity
1 qt contains 1 qt

This item is eligible for free shipping

Product Details

Awlgrip 1010 G3013 Flattening Agent reduces the gloss of AWLGRIP or AWLCRAFT 2000 Urethane Topcoats to a flat or semi-gloss finish. Preferred application is by spray. Roller application will provide more uniform gloss than brushing. AWLCRAFT 2000 cannot be brushed or rolled. *** FOR PROFESSIONAL USE ONLY ***

Info & Guides
Mixing & Reduction - Thoroughly mix the color base and G3013 Flattening Agent. Then stir in the G3010. When one homogenous mixture is obtained add the T0003 Reducer. Strain mix with a 60-100 mesh cone strainer before applying.

AWLGRIP Topcoat: Mixture for Flat Finish - 1 part by volume AWLGRIP Color Base
1 part by volume 1010 Flattening Agent
1 part by volume AWL-CAT #2 Converter
1 part by volume T0003 Reducer
Example: 8 oz. color base : 8 oz. G3013 : 8 oz. G3010 : 8 oz. T0003

AWLGRIP Topcoat: Mixture for Semi-Gloss Finish - 1 part by volume AWLGRIP Color Base
1/2 part by volume 1010 Flattening Agent
1 part by volume AWL-CAT #2 Converter
1 part by volume T0003 Reducer
Example: 8 oz. color base : 4 oz. G3013 : 8 oz. G3010: 8 oz. T0003

AWLCRAFT 2000 Topcoat Mixture For Flat Finish - 2 parts by volume Awlcraft 2000 color base
2 parts by volume 1010 Flattening Agent
1 part by volume Awl-Cat #2 Converter
1 part by volume T0003 Reducer

AWLCRAFT 2000 Topcoat Mixture For Semi-Gloss Finish - 2 parts by volume Awlcraft 2000 color base
1 parts by volume 1010 Flattening Agent
1 part by volume Awl-Cat #2 Converter
1 part by volume T0003 Reducer

Application Instructions - Spray application is recommended when using G3013. The friction from brush and roller applications sometimes shears the G3013 causing areas high and low gloss. If you absolutely cannot spray, rolling preferred to brushing. Awlcraft 2000 cannot be brushed or rolled. Do not apply paint materials to surfaces warmer than 105 F or colder than 55 F. Do not attempt ot to cure products below 55 F.

Technical Information

  • Type: Inert Extender, is an additive used in urethane topcoats.
  • Packaging: Quarts and Gallons
  • VOC: 721 g/lt or 6 lbs/gallon

Reviews for Awlgrip Additive Flattening Agent G3013

2 of 2 Reviews

May 31, 2019

Arrived on time
By goodwrench from virginia

Verified Purchase

I had to call to see if it was in stock agent looked it up no problem ordered it had it in a reasonable time

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

August 2, 2014

Ordering again
By bwilly from HINGHAM, MA

Verified Purchase

Flattened as it should. Thick stuff.


Was this review helpful to you?