Free shipping on orders over $99.99! Don't miss out!

This item is eligible for free shipping on orders over $99.99

Product Details

Sea Hawk Aluma Hawk Aluminum Boat Paint can be used as is on bare aluminum and requires no etching primer. Ideal for metal Jon boats and pontoon boats as a topcoat, or as a primer under acrylic, lacquer, and enamel topcoats. For use above and below the waterline with an environmentally friendly formula that's low in VOCs and chromate-free.

Aluma Hawk paint is available in Quarts and Gallons in Black, Aluminum Gray, and Jon Boat Green colors, ideal for camouflage.

Note: This paint is not for use as an antifouling paint. For an excellent antifouling paint for aluminum boats, try TotalBoat AlumiPaint AF (sold separately).

Tech Specs
Item Number Size Color
SHW-AH7005QTQuartBlack
SHW-AH7005GLGallonBlack
SHW-AH7031QTQuartAluminum Grey
SHW-AH7031GLGallonAluminum Grey
SHW-AH7033QTQuartJon Boat Green
SHW-AH7033GLGallonJon Boat Green
Dry Times (Hours) 50°F 75°F 90°F
To Touch 2-3 hours1 hour½ hour
To Recoat 24 hours6 hours3 hours
To Overcoat 24 hours6 hours3 hours
Info & Guides

Technical Information

Features

  • Premium, marine grade rust-resistant topcoat or lift-resistant primer under enamel, acrylic, and lacquer topcoats
  • Excellent weatherability and adhesion on aluminum and metal above and below the waterline
  • Simple, fast, one-step application; dries fast
  • Eco-friendly chromate-free formula is safe for use in salt or fresh water
  • Innovative formula is water resistant and oil hydrocarbon resistant

Technical Information

  • Sizes/Colors: Quart, Gallon/Black, Aluminum Grey, and Jon Boat Green
  • Finish/Sheen: Flat
  • Shipping Weight: 11.25-11.65 lbs/gal (depending on color)
  • Recommended Coats: 2
  • VOC (as supplied): 413 g/L
  • Film Thickness: Wet Film Thickness (WFT) 2.1-3.1; Dry Film Thickness (DFT) 1.0-1.5
  • Solids by Volume: 47-49%
  • Solids by Weight: 70-71%
  • Theoretical Coverage: 770 ft2/gal @ 1 mil DFT
  • Storage: Place in protected storage between 40°F and 100°F. Avoid exposure to direct sunlight.
  • Typical Shelf Life: 2 years when stored properly
  • Application Method: This product may be applied by brush, roller, or spray. No sanding required between coats if less than 48 hours pass between coats
  • Thinning: MEK (methyl ethyl ketone)
  • Cleanup: Xylene or MEK
  • Suitable as an Antifouling Paint? No. This paint has no antifouling characteristics