This item is eligible for free shipping
Multi-purpose TotalBoat Special Brushing Thinner 100 improves the flow for solvent-based TotalBoat paints and primers applied by brush or roller. Formulated especially for use with TotalBoat Wet Edge topside paint, TotalGold, TotalTread non-skid paint, and others.
Note: Use Epoxy Primer Thinner 200 with TotalProtect & Aluminum Boat Barrier Coat Primers. Do not use Brushing Thinner 100 with these 2 primers.
Due to its slower drying properties, Thinner 100 improves flow and helps preserve the wet edge, extending the working time in warm weather conditions (over 75°F) when applying TotalBoat Topside Primer or TotalBilge paint by brush or roller.
After painting, use Special Brushing Thinner 100 to clean painting tools and equipment quickly and easily.
Available in Quart and Gallon sizes.
Technical Information
Improves flow characteristics for these TotalBoat coatings:
- Wet Edge Topside Paint
- Wet Edge Cold Cure Topside Paint
- TotalTread Non-Skid Deck Paint
- TotalBilge Protective Bilge Paint
- Underdog Ablative Antifouling Bottom Paint
- KeelHauler Ablative Antifouling Bottom Paint
- Spartan Ablative Antifouling Bottom Paint
- Gleam 2.0 Marine Spar Varnish
- Lust Marine Varnish
- TotalGold Decorative Topside Paint
- Outdrive AF Copper-Free Antifouling Paint for props and underwater metals
- TotalBoat Topside Primer
Improves flow and wet edge working time in warm conditions (above 75°F) for:
- TotalBoat Topside Primer
- TotalBoat TotalBilge
- TotalBoat Lust Spar Varnish (above 80°F)
Do not use with the following coatings:
- TotalBoat JD Select ablative antifouling bottom paint
- TotalBoat 2-Part Epoxy Primers
- TotalBoat Envy 2-Part Varnish
- TotalBoat Aluminum Boat Topside Paint
- TotalBoat TotalBoat Inflatable Boat Paint
- TotalBoat TotalProtect Barrier Coat Primer (Use Epoxy Primer Thinner 200 instead)
- TotalBoat Aluminum Boat Barrier Coat (Use Epoxy Primer Thinner 200 instead)
WARNING: This product can expose you to chemicals including cumene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Reviews for TotalBoat Special Brushing Thinner 100
Verified Purchase
Product works well with the Total Tread paint. No chemical content printed on container. By law it should be. Most thinners for one part urethane are kerosene and naphtha. I guess marketing is more important than compliance.
Was this review helpful to you?
Verified Purchase
Great thinner. Perfect for making the product flow like glass
Was this review helpful to you?
Verified Purchase
I sprayed 6 coats of TB Gleam on white oak patio furniture. First was thinned 25% with this solvent. Clean up per coat was via the same. Performance in both tasks was without issue. What you need from a thinner. The gallon can was overkill, a two handed whopper, and plenty left over after spraying 2 gallons poly spar varnish. But a lot of spillage. The can CAN'T control the pour. Expensive stuff if 5-10% ends up wasted. I would buy 2 or more quarts if I could, instead.
Was this review helpful to you?
Verified Purchase
Are use the brushing thinner recently on a boat project. Our shop would normally not get involved in but it was a 1956 Chris craft needed. Partial restoration are used to center for brushing and thinning. Total boat gloss varnish worked amazingly well allowing more workable time with the finish
Was this review helpful to you?
Verified Purchase
Great for thinning and cleaning. Needed very little to make Lust flow smoothly in warm temps.
Was this review helpful to you?
Verified Purchase
Worked as it should
Was this review helpful to you?
Verified Purchase
My painter liked it and guidance from the company salesperson was great . Thanks 🙏🏽
Was this review helpful to you?
Verified Purchase
It thins my Totalboast Lust varnish nicely.
Was this review helpful to you?
Verified Purchase
Product seems ok, but just so blooming expensive. Should be some way to find out whether it is just plain old fashioned, cheap paint thinner from your local paint store.
Was this review helpful to you?
Verified Purchase
I thinned each gallon of paint with 4 oz. of thinner - stirring until well blended before rolling on. It made the paint glide effortlessly onto my deck,
Was this review helpful to you?