This item is eligible for free shipping
TotalBoat FlexEpox is a tough, 2-part flexible epoxy adhesive used to create permanent structural bonds that dynamically absorb stresses from contraction, expansion, shock, & vibration, and bend without breaking. Use on fiberglass, metal, plastic, and wood—even hard-to-glue, oily domestic and tropical hardwoods. Great for repairing aluminum boats, too.
Simple 1:1 mix ratio, 75-minute working time, & fast cure time make it easy to use and ideal for quick repairs. Also for creating small laminated parts subject to a lot of flexing.
FlexEpox works in a wide temperature range, from 40 to 125°F, and can be applied to damp surfaces. It can even cure underwater. Pair with TotalBoat fillers to suit your application.
Available in an 8 oz. kit and a 32 oz. kit.
Item Number | Kit Contents |
---|---|
TB-7751 - 8 oz. Kit | One 4 oz. bottle of resin and one 4 oz. bottle of hardener |
TB-7752 - 32 oz. Kit | One 16 oz. bottle of resin and one 16 oz. bottle of hardener |
Technical Information
Features
- Bonds fiberglass, glass, metal, plastic, and wood, including hardwoods that typically are a challenge to bond because of their natural oils.
- Unaffected by contraction, expansion, shock, & vibration.
- Simple 1:1 mix ratio, long open time, and fast cure time make FlexEpox easy to use.
- Forms permanent bonds on dry or damp surfaces.
- Can be used in temperatures as cool as 40°F.
Specifications
- Color: Amber
- Mix Ratio: 1 part resin to 1 part hardener (by volume); 1.21 parts resin to 1 part hardener (by weight)
- Gel Time: Adhesive will gel in approximately 40 minutes at 72°F
- Working Time (thin film) (@ 72°F): 75 minutes
- Initial Cure Time (@ 72°F): 3-4 hours
- Workable Cure Time (@ 72°F): 7-10 hours (24-hour minimum for high loads)
- Application Temperature: 40-125°F
Reviews for TotalBoat FlexEpox Flexible Epoxy Adhesive
Verified Purchase
Used this product to adhere spray rails on a 30 repco, the epoxy is a lot funnier than I expected, but it did cure well. If using in surfaces where this product can drip or run I suggest using a healthy amount of cabosil to thicken
Was this review helpful to you?
Verified Purchase
I called to see if you recommended anything to thin it with. You told me there was nothing I could use to thin it. I wasn't real sloppy to use and It cleaned up well with gasoline. Also, it did well in cool weather. I'll bet it hardens up very quickly in hot weather, however.
Was this review helpful to you?
Verified Purchase
Great Product for what I was trying to accomplish
Was this review helpful to you?
I need something flexible and strong to fix flaws/damage in a custom molded expanding polyurethane foam seat insert for an open wheel race car. I bought this product to experiment on some test pieces of molded foam, and it works very well. Adhesion to the foam exceeds the foam's strength, flexibility and toughness is outstanding, and it can be applied to coarse weave fabric to bridge gaps and reinforce thin areas. It's a little too viscous for some applications, but manageable. The only other drawback is that gaffer or duct tape will not adhere well to the cured product (a racing seat insert is normally covered with gaffer tape as a final covering). This can be solved however, by applying the gaffer tape to a thin layer of the epoxy while still wet, which gives good adhesion once cured. Hopefully, this product will be back in stock by the time we have cooler weather (for longer working time), when I plan to do the actual repairs.
Was this review helpful to you?
Verified Purchase
Fantastic adhesion i dripped some mixed product on the glass cover of the scale. The hardened drip would not scrap off Drips on the uprepared alumium had to be ground off to remove
Was this review helpful to you?
Verified Purchase
Carbon fiber tips on kayak and canoe paddles made with FlexEpox are durable and chip resistant even in heavy use on the rocks. Highly recommend.
Was this review helpful to you?
Verified Purchase
I was looking for something like traditional epoxy resin but with a little flex. Even though it's early, this product seems to be just what I needed.
Was this review helpful to you?
Verified Purchase
This epoxy works well. Easy to mix, long open time, and sets firmly. I like having equal parts of epoxy and hardener. The manufacturer is very happy to help with special applications, and special instructions for an unusual circumstances.
Was this review helpful to you?
Verified Purchase
Easy to work with, we used it to glue teak strips to marine plywood
Was this review helpful to you?
Verified Purchase
Simple 1 to 1 mix great working time my only complaint is the bottles leaked during shipping
Was this review helpful to you?