This item is eligible for free shipping on orders over $99.99
This item will require additional time to ship
TotalBoat Underwater Repair Epoxy is a must-have for your boat's emergency repair toolkit. This versatile 2-part epoxy putty stops leaks, fills voids, & patches holes in fiberglass, aluminum, steel, wood, and concrete surfaces including hulls, seawalls, decks, docks, concrete barriers and pilings, and much more. It also cures underwater, & even underway.
Cured putty resists abrasion and impacts, and prevents further metal corrosion, or wood and concrete erosion. If the repair is below the waterline, cured putty can be overcoated with TotalBoat TotalProtect or 2-Part Epoxy Primer before overcoating with antifouling paint.
Available in 2-Pint, 2-Quart, and 2-Gallon Kits for repair jobs of different sizes.
Not for use in potable water, & once cured, is not sandable.
|TB-6667-K||2-Pint Kit||1 pint Part A resin, 1 pint Part B hardener|
|TB-6666-K||2-Quart Kit||1 quart Part A resin, 1 quart Part B hardener|
|TB-6665-K||2-Gallon Kit||1 gallon Part A resin, 1 gallon Part B hardener|
|Mix Ratio||1 part Part A resin to 1 part Part B hardener|
|Mixing Method||By hand (wear tight-fitting gloves) or using a putty knife|
|Color (Admixed)||Dark green|
|Application Temperature||Above 50°F|
|Application Method||By hand (wear tight-fitting gloves) or using a putty knife|
|Application Thickness||Spread thoroughly mixed putty smoothly onto a clean surface at a thickness of approximately 1/8'' to 1/4''|
|Time to Begin Firming||Approximately 2 hours @ 70°F|
|Time to Achieve Full Cure||6-8 hours @ 70°F—in air or underwater|
|Suitable for Use in Potable Water?||NO|
|Suitable for Sanding and/or Painting?||NO|
|Usage||Use above, at, or below the waterline|
September 21, 2020
I used this to repair a crack (on the lower step) of my pool steps (fiberglass). So far, so good. I thought the final color was white. It's not, it's gray. Might have to apply another "coat" to totally seal the crack because I think it's still leaking. Haven't done it yet as the pool is now too cold to get in to do the final application. Will update after the final repair. But....it appears to work as planned.
July 6, 2020
I use this fix cracks in in-ground pools.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.