This item is eligible for free shipping
TotalBoat 2:1 Epoxy Pumps are metered to make measuring and dispensing the exact amount of TotalBoat 2:1 Resins and Hardeners quick, neat, and easy. Pumps provide the precise 2:1 mix ratio so you get a proper cure every time without worrying about measuring correctly. This simple 2:1 epoxy pump system requires just one full stroke of Resin and one full stroke of Hardener dispensed into a mixing cup. Stir resin & hardener thoroughly and apply.
The 2:1 resin pump has a white pump head, and the 2:1 hardener pump has a white pump head with a black dot on it indicating the 2:1 mix ratio.
These pumps are compatible with TotalBoat High Performance 2:1 Epoxy Resin/Hardeners and TotalBoat Penetrating Epoxy Resin/Hardener.
IMPORTANT: Pumps are calibrated and measured to automatically dispense the appropriate 2:1 mix ratio with ONE-pump of Resin to ONE-pump of Hardener.
After trimming, if needed, and properly inserting pumps, be sure to prime the pumps before use by pushing down and releasing the head of each pump several times until you get a steady stream of liquid without any air pockets.
NOTE: Pumps do not work with pint sized resin kits.
Technical Information
Package Includes:
September 6, 2023
These make epoxy dispensing a whole lot easier. Beats always having to have a graduated mixing container on hand.
July 15, 2023
I have finished my first coat on the 3/4" Douglas Fir plywood and ready for step 2. It's easy and very applicable for mixing and clean up. I highly recommend it to anyone who needs to replace their pontoon boat deck. Thank you for your high quality and reasonable priced sealer for my pontoon boat. I believe it is the best choice I made.
March 28, 2023
pumps work fine
June 23, 2022
These pumps help definitely help with keeping your work area clean.
December 26, 2021
The pumps don't fit on the pint size penetrating epoxy containers.
December 8, 2021
as advertised, great product, easy to use even for a novice
November 26, 2021
The pumps did not fit the epoxy bottles I bought. JTD promptly refunded my money. Great company.
May 24, 2021
A real disappointment in this kit, too small to fit, obviously it was for smaller containers.
May 18, 2020
It's great to have a few extra pumps around for the epoxy. I don't use the epoxy that often so sometime the pumps "freeze up." Having new ones around gets me going faster.
February 25, 2020
Pumps are O K. Hardener pump emptied 1/2 gallon of hardener and some of epoxy gallon still remained. Then hardener pump stopped pumping properly so I ordered a new set.
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy