This item is eligible for free shipping on orders over $99.99
Quantum 2KA Two-Component Polyurethane Topcoat Aerosol Spray delivers durable, repairable, ultra-high gloss Quantum99 polyurethane topcoat in a convenient spray can that's a perfect size for repairs & small projects.
The base & activator are measured precisely and automatically inside the can so there's no messy measuring & mixing. Quantum 2KA's advanced propellant technology is easy to use, just aim and spray to get exceptional gloss, gloss clarity, gloss retention, chemical, stain, & weather resistance. Aerosol applies evenly and consistently until can empties. Each can covers 27.5 sq ft @ 1 mil, and empty cans are recyclable.
Available in 13 popular Quantum99 colors and Clear.
NOTE: Once activated, usable pot life is about 12 hours @ 72 degrees F.
|Quantum 2KA Aerosol||Physical Properties|
|Appearance:||Ultra-high gloss, various colors|
|Gloss: 92 @ 60°|
|Distinctness of Image (DOI): 84 @ 20°|
|VOC Admixed:||<420 g/L (3.5 LBS/GAL) - All colors.|
|Coverage per Can:||27.5 sq. ft. @ 1 mil|
|Admixed Viscosity||16-18 Zahn #2|
|Volume Solids (Admixed)||52 +/- 2%|
|Usable Pot Life:||Approximately 12 hours after activation @ 72°F|
|Impact Resistance: 80 inches/lb.|
|Shelf Life:||2 years from date of manufacture|
|Usage:||For interior and exterior use above the waterline only. Not for use below the waterline.|
|Adhesion Promoter:||Use Quantum Adhesion Promoting Surface Treatment (sold separately) before application to ensure strong adhesion of this coating.|
|Dry Times||Air Dry @ 72°F, 50% RH)|
|Light Service||36 hours|
|Full Cure||7 days|
|Overcoat (Self)||15 minutes, minimum / 24 hours, maximum|
|Overcoat (Clear)||1 hour, minimum / 24 hours, maximum|
Before the introduction of Quantum99, 2 part topside paints were for professional use only. Complicated reducers, activators, and primers meant that 2 part polyurethane systems were mostly used by builders, yards, and professional paints.
Quantum99 has raised the bar again for topside paint systems, because now it's available in a two-component aerosol spray that's easy to use for touch-ups or for coating smaller areas.
Quantum99 has garnered rave reviews and proven results for superior gloss, gloss retention, and durability. Easy to use. Easy to repair. Its high-solids, eco-friendly formula ensures fewer coats and VOC compliance.
Quantum 2KA 2-Part Aerosol Polyurethane Topcoat Features
Caution: Application of these product systems requires recommended temperature/humidity conditions and film thickness ranges. The material, hangar, and substrate temperature should be no lower than 45°F before, during, and after application. Do not apply paint materials to surfaces less than 5°F above the dew point, or to surfaces warmer than 125°F. Substrate temperature should be minimum 45°F to maximum 125°F.
Notes: Air dry and overcoat times are dependent on shop conditions. To accelerate dry times, use Quantum99 Urethane Accelerator (sold separately). If recoating after 24 hours, scuff-sand with 320-800 grit sandpaper.
<b>Quantum<sup>99</sup> Polyurethane Topcoat Advantages:</b>
<b>Available Quantum 2KA Aerosol Colors:</b>
Personal protection is required for using Quantum 2KA or being in the environment where Quantum 2KA is being applied. Use respirator mask type A2/P2 and protective gloves. It is also recommended that you wear a paper paint suit to protect skin and clothing during application.
Quantum 2KA contains isocyanate. Persons with lung or breathing problems or prior reactions to isocyanates must not be exposed to vapor or spray mist. Before using, read all safety information on the aerosol label and the safety data sheet.