Add EZ-Poxy performance enhancer to one-part, solvent-based Pettit topside finishes for higher gloss, durability, longevity, and scratch resistance. This additive increases flow out of brush strokes and roller stipple, providing a mirror-like high gloss finish.
Use with EZ Poxy, EZ Bilge, and EZ Decks for the appearance and performance associated with expensive 2-part linear polyurethane finishes. Unlike 2-part paints, paint and varnish catalyzed with Performance Enhancer can be applied over one-part finishes in good condition. Use one 8 oz. can per gallon of paint or varnish.
|Vehicle Type||Isocyanate catalyst|
|Mix Ratio||16:1 (paint to hardener by volume)|
|Application Method||Brush or roller ONLY. DO NOT SPRAY!|
|Thinner||Pettit 120 Brushing Thinner or 120VOC Thinner|
|VOC Content||607 g/L|
|Pot Life (used with EZ-Poxy)|
|90°F - 2 hours|
|70°F - 3 hours|
|50°F - 5 hours|
|Dry Times (used with EZ-Poxy)||To Touch||To Touch|
|90°F||1 hour||8 hours|
|70°F||2-1/2 hours||16 hours|
|50°F||5 hours||24 hours|
Associated Pettit Products
WARNING: Cancer - www.P65Warnings.ca.gov
May 25, 2022
Used with the EZpoxy paint. Was easy to use, mixed easily. I am very pleased with the results.
February 21, 2021
Didn't get to use it! DO NOT use for SPRAY paint application. I wished it was more obvious in the description.