This item is eligible for free shipping
Propspeed Foul Release Coating is an antifouling paint system for propellers, running gear & underwater metals so slick, barnacles can't stick. With Propspeed, there'll be no marine growth, just a perfectly smooth surface. Any fouling that may attach if the boat is stationary for an extended time falls away when you get underway again. So there's no drag, and no drag means better engine performance, lower fuel consumption & lower fuel costs.
Propspeed keeps underwater metals free of fouling and corrosion for up to 2 years. It's also safer for marine life, because its silicone-based formula contains no biocides. For best results, read instructions carefully, and watch videos before applying. It's also recommended to have a second person to help.
Available in 200ml, 500ml, 1L* & Combo Pack Kits.
| COVERAGE GUIDE | Prop Size (Inches) | Number of Blades | Propspeed Kit Size(s) |
|---|---|---|---|
| 1 Propeller Only | 13-18 | 3-4 | 200ml |
| '' | 18-24 | 3-4 | 200ml |
| '' | 24-36 | 4-5 | 500ml |
| '' | 36-48 | 5-6 | 1L (1 Liter) |
| '' | 36-48 | 6-7 | 1L |
| 2 Propellers Only | 13-18 | 3-4 | 500ml |
| '' | 18-24 | 3-4 | 500ml |
| '' | 24-36 | 4-5 | 1L |
| '' | 36-48 | 5-6 | 1L |
| '' | 36-48 | 6-7 | 1L + 500ml |
| 2 Props, shafts, struts, rudders, & trim tabs | 13-18 | 3-4 | 1L |
| '' | 18-24 | 3-4 | 1L |
| '' | 24-36 | 4-5 | 1L + 500ml |
| '' | 36-48 | 5-6 | 3 x 1L |
| '' | 36-48 | 6-7 | 4 x 1L (Combo Pack) |
| Saildrives | hp | Number of Drives | Propspeed Kit Size |
|---|---|---|---|
| '' | 10-30 | 1-2 | 200ml |
| '' | 30-75 | 1 | 200ml |
| '' | 30-75 | 2 | 500ml |
| Technical Specifications | |
|---|---|
| Cured Color (Etching Primer & Clear Coat) | Yellow-gold |
| Contains Copper? | No. Safe for all underwater metals. |
| Number of Coats - Etching Primer | 2 |
| Number of Coats - Clear Coat | 1 |
| Dry Time Between Coats (Etching Primer and Clear Coat) | Dry to touch - 3-5 minutes @ 80°F |
| Application Method - Etching Primer | Brush or roller |
| Application Method - Clear Coat | Brush ONLY |
Propspeed Antifouling Paint Means Less Fuel Used, Less Work, More Speed, & More Fun!
Propspeed is an advanced foul-release coating with a super-slick, silicone-based clear topcoat that eliminates fouling on propellers, running gear, and underwater metals. Its copper-free formula provides multi-season protection for boats of all sizes and types—both commercial and recreational—including sailbboats, cruisers, sport-fishers, superyachts, patrol boats, tugboats, trawlers, and ferries.
For Success, Timing is Critical
Propspeed is easy to apply and doesn't require any special equipment, but you do need to read and understand all directions before you start in order to learn the application timing requirements to achieve a proper chemical bond between the Etching Primer and Clear Coat. Proper application helps ensure maximum adhesion, effectiveness, and longevity of the coating.
Before applying Propspeed, please read the Propspeed Application Guide and watch the Propspeed application video.
Before launching, Propspeed requires a minimum of 8 hours to dry. In colder temperatures (40-60°F), allow at least 24 hours drying time before launching. Unlike conventional antifouling bottom paints, the effectiveness of Propspeed isn't affected adversely by sitting out of water for extended time periods in either cold or warm climates. Just be sure to protect any Propspeed-coated areas from damage.
NOTE: 200ml and 500ml DIY complete kits are available for boats with saildrives and fewer or smaller components; the 1L and Combo Pack are recommended for professional use on larger vessels.
* If purchasing the 1L Kit, Propclean Wipes and Propprep metal conditioner (wipes or liquid) are an integral part of the Propspeed coating system and must be purchased separately. The 200ml, 500ml, and combo kits include Propclean Wipes and Propprep Wipes.
For help in determining which kit to purchase, please refer to the Coverage Guide below, or call a knowledgeable JD customer service representative at 800.423.0030.
Technical Information
Propspeed Foul Release Coating System Features
- Copper-free formula is safe for all underwater metals.
- Improves performance, speed, and fuel economy by preventing accumulation of marine growth.
- Contains no toxic biocides; safe for marine life.
- In drive, easily releases any fouling that may have accumulated on running gear while stationary.
- Eliminates cavitation and vibration, for a smooth, fast ride.
- Easy to apply.
- Multi-season coating prevents fouling and corrosion for up to 2 years.
- Available in DIY and Professional Kits.
- Kits include easy-to-follow instructions.
- Important! Install all zincs before applying Propspeed.
Propspeed Application: 5 Easy Steps
- 1. Prepare the metal surface: Sand to an 80-grit profile or use Propstrip (sold separately) to remove old coatings.
- 2. Initial cleaning: Use Propclean wipes to remove grease and other surface contaminants.
- 3. Metal conditioning: Apply Propprep solution liberally by rag or wipes, working over small areas at a time. Do not allow to dry out. Remove by wiping off thoroughly with a clean rag.
- 4. Apply Etching Primer (2 coats): Mix 2-part etching primer base and hardener in a 4:1 ratio. Apply 1st coat with a brush or foam roller.
- 5. Apply clear coat (1 coat): Apply Clear Coat topcoat by brush (do not use a foam roller) when the final coat of etching primer is dry to touch. This should be about at 80°F & 85% RH.
RPS200 - 200ml DIY Kit Contents
- (1) 96ml Etching Primer Base
- (1) 24ml Etching Primer Hardener
- (1) 80ml Clear Coat
- Propclean Wipe
- Propprep Wipe
- Mixing stick
- This kit will coat (1) 24'' prop. See Coverage Guide below for more coverage information.
RPS500 - 500ml DIY Kit Contents
- (1) 240ml Etching Primer Base
- (1) 60ml Etching Primer Hardener
- (1) 200ml Clear Coat
- Propclean Wipes
- Propprep Wipes
- Mixing stick
- This kit will coat (1) 36'' prop or a set of (2) 24'' props. See Coverage Guide below for more coverage information.
PSLKIT - 1L (1,000ml) Kit Contents - NOTE: Must purchase Propclean and Propprep separately
- (2) 240mL Etching Primer
- (2) 60mL Etching Primer Hardener
- (1) 400mL Clear Coat
- (2) mixing sticks
- IMPORTANT: Propclean Wipes & Propprep metal conditioner (wipes or liquid) are a required part of the Propprep system, and MUST BE PURCHASED separately with the 1L Kit.
- See Coverage Guide below for components that can be coated with the 1L Kit.
PRSCOMBO - Combo Pack - <b>Exclusive to Jamestown Distributors</b>
- (4) 1L Kits (782A)
- (1) pack of Propclean wipes (10/pk)
- (1) pack of Propprep wipes (10/pk)
- See Coverage Guide below for components that can be coated with the Combo Pack.
Additional Product Notes:
- If you run out of one item or another, Propclean, Propprep (available in a liquid form), Etching Primer, & Clear Coat are also sold separately.
- Propstrip, which can be used to remove old Propprep or other coatings, is sold separately.
- Also available are Propprep Paint Stirring Wheels (10/pk), which aid in the mixing of the 2-part Etching Primer and the Clear Coat.
- For protection on underwater lights and plastic bow thrusters, you can apply the Clear Coat directly (do not use the etching primer)
Top Tips for DIY Application - Planning and Preparation are the Keys to Success!
- Ensure that the surface is abraded to an 80-grit profile.
- Clean the surface thoroughly with the blue Propclean wipe.
- Remove the residue immediately with a clean, dry, white cotton rag. Repeat until there's no residue remaining.
- Condition the metal surfaces with the red Propprep wipe.
- Remove the residue immediately with a clean, dry, white cotton rag. Repeat until there's no residue remaining.
- Propprep is acidic—take extra care when wiping the surface.
- Apply the Etching Primer as soon as possible.
- Mix the Etching Primer Base thoroughly for about 2-3 minutes before adding the Etching Primer Hardener, or the system will not work properly.
- When the Base is stirred thoroughly, add the entire contents of the Hardener bottle into the Base container to ensure the proper 4:1 ratio. Mix thoroughly.
- Pour into a clean plastic paint tray.
- This system requires 2 coats of Etching Primer and 1 coat of Clear Coat. The timing of each coat is essential to enable proper chemical bonding between the coats.
- Apply the first coat of Etching Primer with a brush or roller.
- Wait approximately 3-5 minutes (at 80°F) to apply the next coat when the surface is dry to the touch (gloved fingertip touched to surface leaves an imprint but does not leave primer on glove).
- You have 3-5 minutes from applying the first coat of Etching Primer to applying the second coat.
- The same 3-5 minute recoat rule applies between the second coat of Etching Primer and the Clear Coat.
- For complete step-by-step details, read the Propspeed System Application Manual before applying Propspeed.
Additional Items Needed for Propspeed Application (sold separately)
- Dual action sander
- 80-grit sandpaper
- Plenty of clean cotton rags for wiping
- Plastic mixing containers
- Disposable brushes
- Disposable foam rollers
- Disposable plastic paint trays
- Mixing sticks
- Paper paint suits
- Disposable nitrile or latex gloves
- Eye protection
- Dust sanding mask
HEALTH AND PERSONAL SAFETY INFORMATION
Be sure that you read and understand the information in the SDS and TDS documents for each of the products in the Propspeed sytem before starting the application process.
Propstrip: Wear latex or chemical-resistant gloves. Wear safety glasses to avoid contact of product with eyes. See SDS for further safety information.
Propclean: Propclean is alcohol based. Operators should wear gloves, goggles and protective clothing. If splashed onto the skin, wash off with copious amounts of soap and water. If splashed into eyes, wash and flush eyes with water for a minimum of 15 minutes. In case of ingestion, give patient copious quantities of water or milk. Do not induce vomiting. In all cases, seek medical attention promptly. See SDS for further safety information.
Propprep: Propprep is acidic. Operators should wear gloves, goggles and protective clothing. If splashed onto the skin, wash off with copious amounts of soap and water. If splashed into eyes, wash and flush eye with water for a minimum of 15 minutes. In case of ingestion, give patient copious quantities of water or milk. Do not induce vomiting. In all cases seek medical attention promptly. See SDS for further safety information.
Etching Primer: Contains solvents. Do not expose containers to open flame or high temperature heating equipment. It is recommended that a barrier cream or gloves be used for hands, and that when spraying, eye protection or proper face mask (respirator) be worn. See SDS for further safety information.
Clear Coat: Contains organic solvents including xylene. Do not expose to open flame or high temperature heating equipment. Avoid skin contact. It is recommended that a barrier cream or gloves be used for hands and eye protection is worn. Always ensure adequate ventilation when painting. See SDS for further safety information.
Reviews for Propspeed Foul Release Coating System Kits
would recommend over less expensive spray cans
Was this review helpful to you?
