Pettit EZ-Tex Marine Epoxy Repair Compound is an easy-to-use, 2-part epoxy putty for permanent high-strength, waterproof repairs to wood, fiberglass, aluminum, steel, bronze, iron and other metals. Its simple 1:1 mix ratio is easy to measure for great results every time.
Mixed compound spreads easily and is ideal for filling cracks, screw holes, voids, and gouges in decks, hulls, pontoons, and other surfaces. Cured repairs can be easily sanded, tapped, drilled, machined, and painted.
This thick, high-strength repair putty won't shrink, sag, or crack, and can be used above and below the waterline. Available in White only. Choose 4 oz. Kit or 16 oz. Kit.
|Technical Specifications||EZ Tex Marine Epoxy Repair Compound|
|Compatible Substrates||Properly prepared wood, fiberglass, gelcoat, aluminum, steel, bronze, iron, and other metals.|
|Mix Ratio by Volume||1:1 (1 part resin to 1 part hardener)|
|Mix Ratio by Weight||100:80 (100 parts resin to 80 parts hardener)|
|Pot Life||45 min. @ 90°F; 60 min. @ 70°F; 2 hrs. @ 50°F|
|Gel Time||65 min. @ 90°F; 90 min. @ 70°F; 4.5 hrs. @ 50°F|
|Cure Time||3.5 hrs. @ 90°F; 5.5 hrs. @ 70°F; 24 hrs. @ 50°F|
|Thinner||Pettit 97 Epoxy Thinner|
|Cleanup||Pettit 97 Epoxy Thinner|
EZ Tex Marine Epoxy Repair Compound Features
Uses for EZ Tex Marine Epoxy Repair Compound
Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing, eye protection, and face protection when using or sanding this product. Wash face, hands, and any exposed skin thoroughly after handling. Do not eat, drink, or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Do not breathe dust, fumes, gas, mist, vapors, and spray. Please read the Safety Data Sheets (SDS) and the Technical Data sheet before using this product.
May 31, 2021
I found this really easy to measure, mix and use. I liked that I could make up as much as I needed as I needed it. I have used other similar products and this is the one I will use again. It was very easy to apply, set up well and was difficult to sand, which I feel is a good thing. Tough stuff.
January 6, 2021
This product and everything you sell is Top Notch!!!
April 28, 2020
This stuff is a home run! Easy to mix and easy to use!!
February 3, 2020
Easy and quick to mix. Just a little sag, I like the white finish on my deck as I do not feel the need to paint (matched my deck paint).
July 4, 2018
Excellent product for ease because of the 1:1 mix ratio and the smoothness when applied. It sands fast and easily as well.I recently used the product fill in over 200 ground out bottom blisters on a 60' fiberglass bottom.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.