Get Free Shipping on your order now! Don't miss out!
Only 2 left
1 ea contains 1 ea

This item is eligible for free shipping

Product Details

Pettit EZ-Tex Rapid Cure Marine Epoxy is an easy-to-use, 2-part epoxy paste for permanent high-strength, waterproof repairs to wood, fiberglass, aluminum, steel, bronze, iron and other metals. EZ Tex Rapid Cure cures in as little as 1 hour at 75°F, making it ideal for emergency repairs.

Simple 1:1 mix ratio makes it easy to get perfect results every time. The mixed paste is easy to spread, filling cracks, screw holes, voids, and gouges. Cured repairs can be sanded, drilled, tapped, and painted. This thick, high-strength repair paste won't run, sag, or shrink.

Available in a 2 oz. Kit in White only.

Tech Specs
Technical Specifications EZ Tex Rapid Cure Marine Epoxy Repair Kit
Color White
Compatible Substrates Properly prepared wood, fiberglass, gelcoat, aluminum, steel, bronze, iron, and other metals.
Application Temperature 50-90°F
Mix Ratio by Volume 1:1 (1 part resin to 1 part hardener)
Mix Ratio by Weight 100:80 (100 parts resin to 80 parts hardener)
Pot Life 2.5 min. @ 90°F; 5 min. @ 75°F; 20 min. @ 50°F
Gel Time 2.5 min. @ 90°F; 5 min. @ 75°F; 20 min. @ 50°F
Cure Time 30 min. @ 90°F; 1 hr. @ 75°F; 2 hrs. @ 50°F
Thinner Pettit 97 Epoxy Thinner
Cleanup Pettit 97 Epoxy Thinner
Info & Guides

Technical Information

EZ Tex Rapid Cure Marine Epoxy Repair Kit Features

  • Great for high-strength emergency repairs.
  • Cures in as little as 1-hour at 75°F, for minimal downtime.
  • Easy to measure, mix, and apply.
  • Simple 1:1 mix ratio for dependable results every time.
  • Won't run, sag, or drip.
  • Mixed pasted spreads easily.
  • 100% waterproof, when fully cured.
  • Cured material can be sanded, tapped, drilled, and painted easily.

Uses for EZ Tex Rapid Marine Epoxy Repair Compound

  • Fill cracks, voids, and gouges in wood, fiberglass, and other substrates.
  • Fill areas where hardware was pulled out.
  • Fill stripped screw holes.
  • Create waterproof repairs on metals, including aluminum boats and pontoons.


Please read the Safety Data Sheet (SDS) and the Tech Data Sheet before using this product. Use only outdoors or in a well-ventilated area. Wear protective gloves, clothing, eye protection, and face protection when using or sanding this product. Avoid breathing dust, fumes, gas, mist, vapors, and spray. Wash face, hands, and any exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace.

WARNING: Reproductive Harm -