This item is eligible for free shipping
Pettit ECO HRT is a new copper-free antifouling paint that features Pettit's Hybrid Reactive Technology to provide a smooth, durable finish that wears away over time, eliminating paint build-up and the need to sand.
ECO HRT contains Econea instead of copper, making it safe and effective for use on pontoons, aluminum boats, and aluminum outdrives. Econea is an effective alternative to cuprous oxide, and boats painted with ECO HRT may be hauled and re-launched with no loss of antifouling effectiveness.
Hybrid Reactive Technology formula utilizes high-density biocide and film modifiers for better color consistency and up to 25% more coverage, while providing a smoother finish than traditional paints. Compatible over most bottom paints.
Available in Gallons, in your choice of Black, Blue or Pontoon Grey. Black also available in quarts and aerosol.
|Solids by Volume:||55%|
|Solids by Weight:||58%|
|Coverage:||500 ft2 /gal.|
|VOC:||330 grams/liter (as supplied)|
|Biocide:||ECONEA 6.0%, Zinc Pyrithione 4.80%|
|Application Method:||Brush, roller, airless or conventional spray|
|Maximum Roller Thickness:||3/16"|
|Number of Coats:||1 minimum per season with additional coat at waterline|
|Wet Film Thickness:||2.7 mils|
|Dry Film Thickness:||1.5 mils|
|Application Temp:||50℉ Min. / 90℉ Max.|
|Thinner:||120 Brushing Thinner or 120VOC Thinner|
|Dry Time||To Recoat||To Launch|
|90℉||1 hrs||2 hrs|
|70℉||2 hrs||4 hrs|
|50℉||4 hrs||8 hrs|
ECO HRT Features:
WARNING: Pettit ECO HRT paints can expose you to chemicals including talc, carbon black, Ethylbenzene, Titanium dioxide, and cumene, which are known to the State of California to cause cancer and Toluene which is known to the State of California to cause Reproductive Toxicity. For more information, go to www.P65Warnings.ca.gov
May 13, 2023
Followed instructions on label and after 2 coats boat bottom looked great. Easy to apply and covered well.
October 1, 2020
Great overall results. Easy application, be sure to wait specific times between coats. I found a 1/8" nap roller gave me the best results for first 2 coats bc it gave good coverage with little amount of air bubbles and used a 1/8" foam roller for final application which helped give a nice smooth finish. I did reduce by 10% with specified thinner. Love the grey color. 1 gallon covered my catalina 22 with 3 coats including the keel.
August 15, 2020
I just painted the bottom of my boat with this. It went on well, but be sure to use a short nap roller as specified. If it is too thick, it did not dry well. I put on three thin coats, compared to two coats of the previous paint. I will update this review after some time in the water.
May 15, 2020
Great price and service during pandemic. Thanks
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.