Pettit Anchortech UV Resistant Adhesive Sealant

$18.99In StockSee Product Details
Pettit Anchortech UV Resistant Adhesive Marine Sealant
Anchortech Marine Adhesive Sealant squeeze tube
Quantity
1 ea contains 1 ea

This item is eligible for free shipping on orders over $99.99

Product Details

Pettit Anchortech is a semi-permanent, waterproof and UV resistant adhesive sealant. Use this polyurethane hybrid marine sealant on aluminum, most metals, most plastics, glass, fiberglass, and wood.

Anchortech is quick to dry, and can be painted over in as little as 1 hour. It's fully cured after just 24 hours. The non-sag paste formula is easy to apply and tool on both horizontal and vertical seems.

Once cured, it is mold and mildew resistant, and won't shrink, crack, yellow, crumble, or break down. The 100% waterproof seal stays flexible to withstand joint expansion and contraction due to fluctuations in weather and temperature. Apply in temperatures as low as 41 degrees F!

Info & Guides

Best Uses For Anchortech UV Resistant Adhesive Sealant:

Electronics installation, deck to hull, deck hardware bedding and sealing, window and door frames, navigation lights, deck hatches and porthole frames, mast steps, rub rail repair or replacement, scupper installation, bow rail and stanchion installation.

FOR BEST RESULTS: Application temperature range is between 20°F and 120°F. Joint width should not exceed 1/2". If joint depth exceeds 1/2", use foam backer rod. Not recommended for underwater or below grade applications, structural glazing, high temperature surfaces, tuck pointing or surface defects. Store below 80°F in dry place for optimal shelf life.

Technical Information

Features:

  • Above waterline use
  • All weather & low temp applicable
  • Excellent UV resistance, non-yellowing
  • 100% waterproof
  • Paintable in 1 hour
  • Can be applied down to 20&defg;F
  • Mold and mildew resistant

Technical Information:

  • BASE POLYMER: Advanced Hybrid Polymer
  • APPEARANCE/ CONSISTENCY: Gunnable, non-sag paste
  • COLOR: White
  • COMPONENTS: One
  • ODOR: Very mild
  • SOLIDS BY WEIGHT: 99%
  • COVERAGE: 55 linear feet @ 3/16" diameter bead
  • CURE TIME: 24 hours
  • RETURN TO SERVICE TIME: 1 hour
  • APPLICATION TEMP RANGE: 20°F
  • TOOLING TIME: 30 minutes
  • WATER READY TIME: 1 hour
  • PAINT READY: 1 hour

WARNING: This product contains chemicals which are known to the State of California to cause cancer or reproductive harm. For more information, go to www.P65Warnings.ca.gov