Applying Pettit Tuff Coat rubberized non-skid coating to metal surfaces? Start here. Tuff Coat Metal Primer is a corrosion inhibiting primer that creates a chemically etched bond on clean, bare steel or aluminum.

Whenever you are using Tuff Coat on metals indoors or out, if you want it to stick, apply this fast drying water-based primer first.

Tech Specs

Dry Time	To Touch	To Overcoat
90 Degrees F	1/2 Hour	1 Hour
70 Degrees F	1 Hour	2 Hours
50 Degrees F	2 Hours	4 Hours

Info & Guides

Technical Information

Tuff Coat Metal Primer Features:

Single-component water-based acrylic primer
For interior or exterior use
Corrosion inhibiting fast dry formula
Excellent adhesion to most clean metal surfaces
Compatible with all Pettit Tuff Coat rubberized non skid coatings

Technical Information:

Type: Acrylic
Finish: Matte
Solids by weight: 46%
Coverage: 250 sq ft / gallon
VOC: 75 grams per liter
Flash Point: 300 degrees F
Application Method: Roller or Spray
Maximum Roller Thickness: 3/8'' roller
Number of coats: 1 coat
Wet Film Thickness: 6 mils
Dry Film Thickness: 2 mils
Application Temp: 50 deg F Min / 100 deg F Max
Dry Time: (at 50% relative humidity) See table below. Dry times not to exceed 48 hours. If recoat time is exceeded, sand lightly before recoating.

Data Sheets

Pettit Tuff Coat Metal Primer Technical Data

VIEW