This item is eligible for free shipping on orders over $99.99
MAS Epoxy Low Viscosity Resin has a superior blend of low molecular weight epoxy resin and reactive dilutents, for an easy-flowing, non-blushing system.
Use for barrier coatings, laminating, and bonding. Low viscosity epoxy provides complete wet out of fiber-reinforced fabrics, reducing the potential for voids and other imperfections. Modify with fillers such as wood powder or colloidal silica for filling and fairing compound applications.
MAS epoxy is typically used at room temperatures using your choice of hardener (MAS recommends their Fast, Medium or Slow hardeners) in a 2 parts resin to 1 part hardener ratio. This versatile resin system can be used in a wide variety of applications, including boat hulls and structures, as well as laminating and bonding of nearly all materials.
Available in Quart, Half Gallon, Gallon, 4 Gallon, and larger sizes.
Amine blush is a waxy layer that forms during the cure process of most epoxy resins. No blush is critical if you intend to apply additional epoxy or varnish over it. MAS epoxy won't blush as long as it is applied in anything under 98% humidity.
Use protective gloves when working with this product. Use soap and water or white vinegar to clean your hands. Use Denatured Alcohol to clean your tools.
May 24, 2021
I used it to fill some small gaps in an endgrain cutting board I made. I was concerned that the overflow might penetrate the wood near where I applied it, but it didn't, The excess sanded away easily after hardening without leaving a stain or shadow. I will probably buy some higher viscosity resin to fill in larger gaps. I would like to learn a way to mix very small amounts to do small touchups.
May 23, 2020
never done any glass work, measuring by volume, no problem
May 10, 2020
No blush means that you do not have to do any prep between applications. Nothing could be easier. You can also mix the hardeners, fast, medium, or slow to manage any working time or setup you need. The low viscosity resin is perfect for penetrating any glass material and penetrating water damaged wood base. I will never use West products. MAS is far superior.
May 30, 2019
First time using this company and find it to be great stuff. Mixes well and with no blush, which is nice when using on Dynel.
June 3, 2018
.....btw, i find it interesting that I ordered these two products on a Sunday & on Monday, I received a notice from Jamestown that any order over $100.00 would be shipped free.......I paid for the shipping on this order.........
May 9, 2018
Doing minor repairs. Sets up very quickly (10-15 minutes?). Does job just fine.
September 24, 2017
Works very well, the pot life and working times are as stated.
August 4, 2017
I use this for sailboat repairs, always consistent results. MIX IT WELL
February 21, 2017
Even if you can't heat your workshop to plus 60 degree F, you will get good fiberglass penetration and easy use. If to cold use heat gun and you still have plenty of time before curing.
August 22, 2016
repairing a small pram
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.