Marelon - Marine Grade Ball Valves are optimized for marine use above and below the waterline with maximum U.V. inhibitors, and it will not support combustion. Additional marine benefits of the material are its extreme range of operating temperature and it's resistance to abrupt changes in temperature.

Info & Guides

New stem/handle design permits 180° rotation for opening in either direction.

VALVE MAINTENANCE:

All Marelon valves are non-corrosive, but like any moving part in a marine environment, they required regular inspection and lubrication. Do not fail to actuate the handle and lubricate the seals on a regular schedule (water pump grease or even mineral oil will lubricate seals).

Bottom and top connections are NPS (straight) thread. The use of products with NPS (straight) pipe thread is recommended only for low pressure applications, and then only with a generous application of pipe sealant or PTFE thread tape.

All critical hose connections should be double clamped at both ends. Ideally, the hose clamp screws should be mounted opposite one another for maximum security. Use the highest quality AWAB hose clamps for longest life and best performance.

Technical Information

Marelon Advantages

Non-Corrosive
Non-Conductive
Fire Resistant
Impact Resistant
Temp. Range -40 to +176 degrees F
U.V. Resistant
Marelon is a formulation of glass-reinforced Dupont Zytel

Data Sheets

Marelon Plumbing Chart

VIEW

Reviews for Forespar Marelon Ball Valves

1 of 1 Reviews

April 22, 2008

Marelon is good stuff

By Dudley from Dracut, MA

Marelon ballvalves work well in boat plumbing applications. No need to bond- they don't conduct electricity. Not bothered by sal water. Remember, these ballvalves are not the same as seacocks. Only seacocks should be connected to thru hull fittings.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

Showing results for""