Free shipping on orders over $99.99! Don't miss out!
$21.08 In Stock
Taylor Made Dock Pro Vinyl Dock Bumpers
$21.08In Stock
Taylor Made Dock Pro Vinyl Dock Bumpers
Ask a Question
5
Based on 3 Reviews
  • 5 Star

    100%

  • 4 Star

    0%

  • 3 Star

    0%

  • 2 Star

    0%

  • 1 Star

    0%

Taylor Made Dock Pro Vinyl Dock Bumpers Customer Questions and Answers

2 of 2 Questions

Question

What is the recommended spacing between each piece?

Asked on 05/09/2012 by Undisclosed

Top Answer

Depends on size of the boat. One on each end and then one eui distant in the middle

Answered on 06/21/2012 by JAMES ZIOGAS
See More Answers (3)

Answer

I used them as "bump points" on corners both vertical and horizontal coming into my lift. The fact that they stick out a bit is appealing as the fit is narrow and cross wind prevents bump free landings. I can then correct and guide to the next pont without hitting wood. My posts are about 10 feet apart and I used 1 horizontal in between and of course on all horizontal corners. The vertical straight pieces are effective over the 1' tide range we have on the lower Gulf Coast. Be sure to use stainless screws in salt water. Very effective system! Jim

Answered on 05/09/2012 by JAMES COLLINS

Answer

The corner peices simply wrap the corners. You can pivot on them when it is windy. If you are going to rub a side as you dock, then cover the intire langth of the slip to avoid contact with the dock.

Answered on 05/10/2012 by CHARLES FRASCH

Answer

I used only one bumper in the front of the well to protect the front of the boat. I'm not sure about the spacing, sorry.

Answered on 05/10/2012 by KEN MARTIN
Answer Question

Question

Hi, Can you tell me the other dimensions of the straight piece as well as the weight of the piece? Thanks.

Asked on 10/21/2011 by bill allen

Top Answer

Sorry I only bought the corners and installed them. I can tell you that the corner piece was hollow inside - the reason that I know is because I had to shorten one leg of the corner and ended up putting spray foam in the space.

Answered on 10/21/2011 by TONY DUVALL
See More Answers (3)

Answer

I'm not sure what you mean by the "other dimensions", but the size I bought is 36"L x 4"W x 5.5"H. The weight I'm not sure about either, but it is definitely heavy duty and a good product. I did have a problem because I used it at the front of my dock to cushion if the boat moved too far into the slip during docking. The front of the boat has a tendency to "ride up" on the bumper and strike the attachment bolt if you are moving a little fast. That's not the bumper's fault though!

Answered on 10/21/2011 by KEN MARTIN

Answer

Thanks for the info, Tony. Bill

Answered on 10/21/2011 by bill allen

Answer

Thanks for the info Ken. That's what I needed. The webpage only provided length not height and width. Thanks again.

Answered on 10/21/2011 by bill allen
Answer Question
1 of 1