Reviews for Core-Cell A500 Plain Foam Sheets

August 26, 2019

Verified Purchase

Product cuts well, score it and break it along the lines. Make sure you saturate the core well with unthickened epoxy and bed it well in thickened epoxy. The core will not rot, but it will debond if not properly prepared as mentioned. It is not as good as coosa board for load areas, I use them together as required.

April 8, 2019

Verified Purchase

Building a gun stock using this and carbon fiber

June 14, 2018

Verified Purchase

Very useful for panel building. Good heat formability.

April 9, 2013

Your comment system is daunting. Core-cell is fantastic for beefing up soft decks and cabin trunks where water has rotted balso or plywood. With the voids cleaned out and filled with the foam, the result is a laminate strength probably better than "as manufactured". I have also made bulkheads of two sheets of Kytex with Core-Cell sandwiched inside.Tricky to work with, expensive, but worth it, unquestionably. JD's prices are fair for this item.

October 12, 2015

Verified Purchase

I used this to replace some waterlogged plywood core on my sliding deck hatch. I was easy to cut and flexed to accommodate the slight bow in the hatch cover. A few sandbags held it in place while the epoxy cured. The hatch is as strong as it was before but much lighter. I am going to tackle other soggy core projects now that I found this!

February 7, 2019

Verified Purchase

Opened up the product to find that the lines weren't straight and it was messed uo