This item is eligible for free shipping
This item will require additional time to ship
The Johnson Pump Low Boy Bilge Pumps have a low profile design for easier mounting and removal of the pump in tight bilge areas. This is common in vessels with bilge pumps located directly beneath inboard or I/O engines. It has a removable cartridge style and is easy to clean even when in salt water.
The motor cools itself from the water and meets all the requirements of the ABYC, NMMA, and ISO8849 marine specifications. Comes complete with both straight and 90° smooth elbow Dura-Port discharge ports which eliminate stress cracking caused by over-tightened hose clamps. Three year warranty.
| Item | GPH | Capacity 3ft Head | Capacity Straight | Connection |
|---|---|---|---|---|
| JPI-33703 | 750 | 700 GPH | 800 GPH | 3/4in |
| JPI-33103 | 1250 | 952 GPH | 1150 GPH | 1-1/8in |
Technical Information
- Voltage: 12V
- Amp Draw: 3A
- Fuse Size: 5A
- Body: ABS Thermoplastic
- Shaft Seal: Lip Seal
- Max Length 5.75" (146 mm)
- Width: 3.2" (81 mm)
- Height: 2.82" (72 mm)
- Wire Size: 16 GA (1.3 mm*mm)
Reviews for Johnson Pump Low Boy Bilge Pump
January 28, 2013
Compact and quiet, gets the bilge drier than my previous pump. Fit where a regular pump would not. Good volume for the size of the discharge hose.
Was this review helpful to you?
December 24, 2012
I had been looking for a pump that would fit in a narrow space without sitting on the keel bolt. The pickup fit next to the keelbolt so my bilge is dryer than ever.
Was this review helpful to you?
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
