Free shipping on orders over $99.99! Don't miss out!
$27.47 In Stock
Groco ARG Series Strainer w/ Monel Basket
$27.47In Stock
Groco Raw Water Strainers - Bronze with Monel filter basket
Ask a Question
4
Based on 1 Reviews
  • 5 Star

    0%

  • 4 Star

    100%

  • 3 Star

    0%

  • 2 Star

    0%

  • 1 Star

    0%

Groco ARG Series Strainer w/ Monel Basket Customer Questions and Answers

4 of 4 Questions

Question

does the cap unscrew for easy winterizing?

Asked on 12/06/2014 by Undisclosed

Top Answer

Yes. Very easy.

Answered on 12/06/2014 by BRITTON COOKE
See More Answers (3)

Answer

Hello. ,yes it should unscrew relatively easily. If you find it is tite,when you put it back on wipe some silicone grease lightly around the rim.this should prevent it sticking next time.

Answered on 12/06/2014 by EUGENE KELLER

Answer

you will need the groco tool to loosen the cap

Answered on 12/12/2014 by HUGH HAZELTINE

Answer

I don't drain the filter for the winter. I draw my antifreeze through the strainer and into the engine exhaust cooling system using the engine pump. I have a valve that allows me to pull fluid from the normal cooling water or an open hose. The simple winterization is the main reason but in case there is hull damage and the bilge pumps wont handle it, I can also pump water out of the bilge through my two engines and overboard.

Answered on 12/06/2014 by GEORGE COURANZ
Answer Question

Question

Where can I find a mounting bracket for this ARG-750 raw water strainer?

Asked on 08/09/2012 by Evie Hopkins

Top Answer

Thanks Nathan. After asking the question I found the brackets could be purchased separately. Really appreciate your help. Evelyn

Answered on 08/11/2012 by Evie Hopkins
See More Answers (1)

Answer

The strainer comes with the mounting bracket, so you can get a brand new one with the bracket's included, or if you just want the brackets you will need the "GRO-ARG-505" upper bracket and the "GRO-ARG-504" lower bracket, both of which we can get for you and they're only $6.72 each, I also highly recommend getting a new mounting strap with that which is the "GRO-ARG-502" for only $3.36, thank you.

Answered on 08/10/2012 by Nathan Fournier
Answer Question

Question

HI I have a 1982 bristol 41.1CC with Westerbeke 52. I would like to add a strainer, any rules of thumb as to size/capacity etc? Raw water hose is 3/4" , not sure why these boats did not come with raw water strainer..... thanks Peter Hatch Kennebunk ME

Asked on 01/24/2012 by Peter Hatch

Top Answer

I just installed two new raw water strainers on my two perkins 4.236 diesels. I looked all over the place (Perkins shop manuals, etc) to determine how much water flow I needed without success. One of the best engine guys in town said that I could match the engine input water pipe (diameter) to the strainer input and output ports (dia). That would provide sufficient water flow even at extended RPM operation. You could go one diameter size larger on the strainers but the engine input line will cut the overall flow back to the max it can accept. We have tested both engines. The stbd engine just got a new manifold heat exchanger and the heat exchanger was professionally cleaned. No sign of overheating at extended run. The engine that has not yet had the heat fixed still runs within limits but is noticeably hotter that the stbd engine. So when you do the strainer upgrade, get your raw water exchanger system cleaned out at the same time for max performance. GoldenDog Prairie 36

Answered on 01/24/2012 by GEORGE COURANZ
See More Answers (1)

Answer

I have Groco ARG raw water strainers on both my engine and utility sea water intakes. I have learned that the monel or plastic baskets are most suitable as the stainless basket will fail within a year in salt water. I would suggest the one inch strainer for your engine intake, to assure that grass etceteras will pass through the plumbing and in to the strainer without clogging elsewhere. My Groco ARG with monel basket, one inch size, engine raw water strainer was installed in 1984 and has about 4,000 engine hours on it with no problems. I would recommend a tee on the inlet with an engine zinc, whatever size your engine uses, to protect the bronze from corrosion. Fair Winds! Don, SV Southern Cross

Answered on 01/25/2012 by DON WOGAMAN
Answer Question

Question

I am looking at instilling this inline filter to our system. The seawater pressure is 7 bar. Is this filter rated for this pressure?

Asked on 06/03/2014 by Undisclosed

Top Answer

This is a question that should be referred to the manufacturer. 1 Bar is one atmosphere of pressure so 7 bar is about 100 psi. I use my strainer in the cooling water flow for an 85 hp diesel engine. Contact Groco to determine safe use.

Answered on 06/03/2014 by GEORGE COURANZ
Answer Question
1 of 1