Pettit EZ Decks - Non-Skid Deck Paint

Name: Pettit EZ Decks - Non-Skid Deck Paint
Brand: Pettit Z-Spar
SKU: 223927
Price: 46.02 USD
Rating: 3.67 (3 reviews)

See all reviews /See all questions and answers /Ask a Question

$46.02Limited StockSee Product Details

Home / Paints / Topside Paint

Pettit Z-Spar

Pettit EZ Decks - Non-Skid Deck Paint

See all reviews /See all questions and answers /Ask a Question

$46.02Limited StockSee Product Details

Options

Quantity

1 qt contains 1 qt

This item is eligible for free shipping on orders over $99.99

Product Details Tech Specs Info & Guides Data Sheets

Product Details

Pettit EZ-Decks is a super tough polyurethane non-skid performance deck finish, containing a special grit that produces a slip-resistant finish on all decks and cabin soles.

Easy to apply, EZ decks yields a durable weather and abrasion (wear from foot traffic) resistant finish. Ultraviolet filters resist fading while providing superior color retention that will stay vibrant for years without peeling or cracking like other deck finishes.

Available in three popular colors that match up perfectly with Pettit Easypoxy topside enamel.

Tech Specs

Dry Time	To Touch	To Recoat
90 Deg. F	1-1/2	8
70 Deg F	3	16
50 Deg F	6	24

Info & Guides

VEHICLE TYPE: Oil modified polyurethane

FINISH: High-gloss

COMPONENTS: 1

CURING MECHANISM: Air dry/oxidation

SOLIDS (theoretical): By weight...71.0 +/- 2%
By volume...54 +/- 2%

COVERAGE: 600 sq. ft/gal.

VOC: 375 g/l max.

FLASH POINT: 113 degrees F

APPLICATION INFORMATION:
Stir thoroughly before use. The non-skid agent in this product will float to the surface in the container and must be stirred thoroughly. May be applied by brush or roller. For brush or roller application, apply without thinning, although in hot weather, 5 to 10% of Pettit 120 Thinner may be added to maintain a wet edge. For best results on large, smooth surfaces roll out using a short nap or foam roller followed immediately by leveling off with the tip of a brush. Do not apply on extremely humid days (90% RH or above) or when rain is threatening. Do not apply in late afternoon when working outdoors as the wet film may be adversely affected by dew. When working in cooler temperatures, be sure the air and surface temperatures will remain at or above 50 degrees for at least eight hours after application.

SURFACE PREPARATION:
Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance. Surface must be free of dirt, loose paint, rust, oil, grease, wax, soap and any other foreign matter.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov