Free shipping on orders over $99.99! Don't miss out!
$579.00 In Stock
Shrinkfast 998 Heat Gun
$579.00In Stock
Shrinkfast 998 Heat Gun
Ask a Question
4.6
Based on 16 Reviews
  • 5 Star

    63%

  • 4 Star

    31%

  • 3 Star

    6%

  • 2 Star

    0%

  • 1 Star

    0%

Shrinkfast 998 Heat Gun Customer Questions and Answers

6 of 6 Questions

Question

ho long is the supply hose ?

Asked on 10/21/2011 by joe m

Top Answer

It's stated right in the tech specs. 25ft.

Answered on 10/24/2011 by KEVIN MAHONEY
See More Answers (4)

Answer

Comes with a 25 foot hose.

Answered on 10/21/2011 by Ryan L

Answer

Looks to be 25' long

Answered on 10/24/2011 by MICHAEL SABBAGH

Answer

25 feet

Answered on 10/23/2011 by DOMENICK GRAMUGLIA

Answer

the supply hose is around 20ft. i am able to leave the tank in front of a 17 foot boat and never have to move the tank just move sides of the boat.

Answered on 10/26/2011 by KEITH FOSCO
Answer Question

Question

The regulator dial is bent inside plastic and needle will not give true reading as it hangs up on metal guage. Can this part be replaced or how do you fix it? Does top come off ?

Asked on 02/13/2015 by bailey hawkins

Top Answer

I don't see where the gauge alone is available. You can buy a replacement gauge at this < a href=&quot;http://site:http://www.gossequipment.com/store/GossRegulators.html&quot; target=&quot;_blank&quot;>site:http://www.gossequipment.com/store/GossRegulators.html< /a>

Answered on 02/13/2015 by Rick White
See More Answers (3)

Answer

The regulator can be replaced, but you will bend it again next time tank falls over. regulator will unscrew (guage). To replace. Use Teflon tape to reseat new guage. use a old milk create to hold your propane bottle, this will keep it from falling over.

Answered on 02/13/2015 by MERV BLOUSE

Answer

I'd suggest you call their customer service #

Answered on 02/13/2015 by CHERYL A DAWSON

Answer

I have put mine away but if I take it out I will let you know. I have seen this happen in other tank gauges and usually the plastic cover fell off and it happened when the protection was removed. Just straighten it out with jewelers needle nose or order another from company These items are sold separately as this happens a lot

Answered on 02/15/2015 by ROGER MIGNE
Answer Question

Question

Hi, i never used this equipment, i will be using it to locate delamination on boats hulls with an infrared camera when condition cant drive the temp difference i need. my question is; how can i use it with out damaging the hull with the flame or heat too much? Norberto Villanueva 787-409-3427

Asked on 03/28/2012 by Norberto Villanueva

Top Answer

noberto, i wrap boats for a living.you can use that gun but you have to stand back from hull.put the guard on the gun also.and i would wave gun back and forth around area. bob

Answered on 03/28/2012 by BOB GRUSHESKI
See More Answers (3)

Answer

Afraid i won't be much help to you since i only used the gun to shrink wrap boats !

Answered on 03/28/2012 by RICHARD MASON

Answer

keep the gun far away. the gun is very hot

Answered on 03/30/2012 by ROBERT MCGARRY

Answer

I really don t think you should use the heat gun for this purpose. It is very powerful and you WILL DAMAGE the hull. Consider a torch ( any hardware store). It is less radical.

Answered on 03/30/2012 by JEROME DESBROSSES
Answer Question

Question

could you please let me know the wattage of the Shrinkfast 998?

Asked on 07/10/2014 by Dawn Lasky

Top Answer

There is no wattage. The heat gun is entirely powered by propane. This heat gun does not use electricity.

Answered on 07/10/2014 by GREGORY HAGER
See More Answers (2)

Answer

It's propane. Not electric

Answered on 07/10/2014 by DAVID BUREAU

Answer

There is no electricity it is propane fired.

Answered on 07/10/2014 by KEVIN MAHONEY
Answer Question

Question

what is the recommended spark plug # ?

Asked on 11/21/2011 by Undisclosed

Top Answer

As far as I know there is no spark plug. We only had the gun 1 month and so far its Fantastic. Highly recommend it.

Answered on 11/21/2011 by CHRIS LINDNER
See More Answers (2)

Answer

Dont know havent used it yet.

Answered on 11/21/2011 by RANDY BACHMAN

Answer

I'm not sure what it is because I never took apart yet, Sorry.

Answered on 11/22/2011 by T M
Answer Question

Question

Where do i get a rebuild kit for model 998 i have one that needs work ?

Asked on 06/11/2013 by Rick L

Top Answer

I do not know

Answered on 06/12/2013 by GARY SIDOTI
Answer Question
1 of 1