The Rapid Shrink 100 is an affordable, lightweight but powerful heat shrink gun that can be used for most shrink wrap jobs, from boats to packaging and beyond.
This propane fired heat tool from Dr Shrink is sold in a kit that includes the basics needed to effectively shrink wrap just about any surface.
Simply plug the Rapid Shrink DS-RS70 into a propane source and control the gun with the on/off trigger. Rated at 100,000 BTUs. Kit includes: Heat Gun, 25' hose, regulator, safety glasses & gloves, training DVD, and durable carrying case.
January 11, 2019
The heat gun worked well, wrapped two large boats. The gun worked perfectly and is robust. The case, as others mentioned, is very poor.
October 29, 2018
The unit worked pretty well last year, the first season I owned it, in which I shrink wrapped a kayak and two jet skis. This year it worked for again for the kayak, but failed to light the next weekend when I needed to wrap my two jet skis. I switched the propane tanks to no effect, checked the burner for blockages - non found; checked the igniter - sparking as it should. The valve adjusted the flow as always, but the gas valve may be the issue, as the sound of the gas isn't quite right. FInally, the case is well laid out be extremely fragile. One bump against a door jam and the whole case was sprung out of kilter. Don't buy it.
December 21, 2015
Out of the case this is a great value. I have borrowed a friend's shrink fast gun in the past and this works just as well for less than half the cost.
December 9, 2014
good gun for the money. carry box is cheap and breaks but I would not let this affect my decision. gun works very well.
November 22, 2014
The shrink wrap gun preformed as well as the higher priced guns[have used shrinkfast 900 in the past]. Not built as rugged, but if you're not a constant user this item is a good value.
March 10, 2014
This gun was very easy to use and with the protective heat shield at the tip very safe to prevent wrap melt through and possibly burns from the tip. The provided CD was very effective learning tool that got me up and running within 15 to 20 minutes. I installed an access door in the shrink wrap for the boat this past weekend. Took only 10 minutes, so simple. Seriously considering purchasing the extension tip to wrap the boat myself next fall.