Owatrol Gelcoat Restorer returns dull, faded fiberglass to its original color, luster, and shine. Conventional waxes and polishes sit on the surface and dry out quickly. Unlike expensive polishes, Gelcoat Color Restorer is an oil that penetrates deeply into the fiberglass surface to re-wet the original pigment. It then dries to a durable, long lasting flexible finish.
Owatrol Gelcoat Restorer is easy to apply and simple to maintain.
Note: Not to be used on white gelcoat.
June 28, 2023
Product is easy to apply, used it on my 5th wheel toy Hauler instead of wax. Alot easier to apply. Works Awsome.
June 2, 2022
April 6, 2022
restored VERY badly faded & chalking black gelcoat instantly. the only downside are the instructions for use. i would recommend (though trial & error) to apply very thin with a rag, for best results. using a brush as instructions say creates uneven surface.
July 26, 2021
I tried buffing with abrasives and waxes. This product replaces the original oils which have dried out. And you simply apply with a rag and a few minutes later wipe away excess. In my case a second coat only gave 5% more color. It really is so easy and amazing!
August 25, 2020
I looked hi and low for something that would give life back to the paint on a 1984 Bronco II. I used rubbing compound on it, which helped, but the paint was dried out. I got the best results with the Gelcoat Restorer by putting some on a very small pad and applying a thin coat on a fender, then a door, then the hood etc. I actually didn't try to wipe off the excess, since I put so little on to start with. The results were amazing. The paint regained its true deep color and had nice gloss. It looks like it was painted yesterday.
July 10, 2020
Used this product based on the great reviews on gel coat of an RV. The surface was clean - no oxidation, dry and clean. Owatrol left a hazy mess when it dried - looks terrible!
June 24, 2020
September 14, 2017
Follow the instructions on the can. Work methodically section by section and the difference will appear and inspire.
April 15, 2013
Easy to use, outstanding results. Clean surface is essential. Wipe down surface with acetone after washing. Apply as directed. Looks like new.
May 17, 2012
Brings back the color of faded gelcoat. Wipe it on, let it set for five minutes, wipe off gently then come back and buff gentlely. The original color will pop!