Free shipping on orders over $99.99! Don't miss out!

This item is eligible for free shipping on orders over $99.99
This item will require additional time to ship

Product Details

Marco UP series self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations. Specifically designed to move oil.

Not suitable for gasoline applications.

Tech Specs
Marco Part Number Flow Rate gal/hr 3/8" ID Volts Port dia. Amp Draw
164-220-12 (UP2/OIL)52.9 gph12V3/8 inch NPT3A
164-220-13 (UP2/OIL)52.9 gph24V3/8 inch NPT1.5A
164-020-12 (UP3/OIL)87.2 gph12V3/8 inch NPT7.5A
164-020-13 (UP3/OIL)87.2 gph24V3/8 inch NPT4A
164-080-12 (UP6/OIL)126.8 gph12V1/2 inch NPT10A
164-080-13 (UP6/OIL)126.8 gph24V1/2 inch NPT7.5A
164-320-12 (UP12/OIL)238 gph12V1/2 inch NPT12A
164-320-13 (UP12/OIL)238 gph24V1/2 inch NPT6.5A
Info & Guides

Technical Information

Oil Transfer Pump features:

  • Helical bronze gears
  • Nickel-plated brass body and stainless steel shaft.
  • Self-priming

Reviews for Marco UP/OIL Oil Transfer Pumps

4 of 4 Reviews

July 30, 2020

I am currently fitting to test
By SeaBeast from WA

Verified Purchase

Seems very robust, purpose-ready and high quality. 4 stars until tested. If all well it's a 5.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

May 17, 2020

Yes I would buy it again. Thank you !!
By shorty from PA - Pennsylvania

Verified Purchase

We put this product in our skid loader.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

April 4, 2019

Good little pump
By Jim from Boise, Idaho

Verified Purchase

This little pump works as advertised. I use it to transfer used motor oil that I burn in a shop heater. With 3' of 1/2" suction hose, a strainer and 6' of 1/2" outlet hose, it takes about 40 minutes to transfer 30 gallons at about 55F. Would probably increase volume with a shorter outlet hose and higher temps. The motor just starts to feel a little warm after 40 min. of continuous duty. Couldn't find a 35 strainer as recommended so went with a 30.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

April 2, 2019

Solid product. Did what I needed.
By None from East coast/mid-Atlantic

Verified Purchase

My boat has two big Cat 3208 diesels and a diesel generator. All have fittings and hoses on the oil pan drains. I needed to pump the oil out of each unit, about 3.5 gallons on each main and one more on the generator. Because of a rise in the way the hoses were routed and they are fairly large, it took a little while to build the suction up but once over the hump so to speak it pumped out the 40 weight oil just fine. I had run the engines some to warm up the oil first. I then changed fittings and used the pump to put fresh oil back into the generator. Worked like a champ. No spills and easy to control the amount of oil. The pump is heavy for its size and seems well made. I used Teflon tape on all threaded joints and had no problems with leaks. I used a pushbutton switch to control the on/off which made it very easy to control when changing oil containers. I had to change to Tygon hoses because ordinary vinyl collapses uder the suction.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?