This item will require additional time to ship
The Moeller 22-Gallon White Tank is specifically designed to replace OEM tanks on Boston Whaler Montauk 15' and 17' center console boats. It is white in color instead of traditional red to blend in with whaler colors. It features exclusive molded fill neck with side angle orientation for easy access.
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. The mechanically vented cap floats and is easy to grip with ribbed design.
Tanks include 90° 1/4" NPT Moeller patented "Poplock" aluminum withdrawal elbow that swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. One-year warranty. Tank must be secured with permanent hold down kit.
Available for boats built before 2011 and for EPA-compliant boats built after 2011.
|MOE-031626||Before 2011||22 Gallon||29.25" L x 19.00" W x 13.58" H|
|MOE-031626BR||After 2011||22 Gallon||29.25" L x 19.00" W x 14.00" H|
Moeller Boston Whaler Topside Fuel Tank Features:
July 9, 2019
Was very simple and a great improvement to the two six gallon tanks I had before. I had to cut a "shim" to keep table level and from wobbling. I also used a snitch strap to hold it in place, I think I'll eventually screw down corner feet to hold it a bit more permanently
May 13, 2016
The only problem I had , was that the tank sits on the fuel line coming out of the floor. I had to install a brass elbow so the line didn't get pinched.
April 16, 2015
Good product that fit well. Speedy delivery.
January 10, 2015
By using white NP1 adhesive caulk, one can affix (8) 1"x1"x 1/4" thick Starboard wafers and then 1/2" rubber feet to the bottom of the tank that will elevate it up off the deck in such a manner as to allow clearance for the existing fuel hose routing. Also, this keeps it dry under the tank by not trapping moisture there. Hold the tank in place by fabricating (4) 1/2" Starboard corner brackets in the Seafoam shade screwing down into the deck with SS screws. It does not move!
July 30, 2014
product was perfect priced right fast shipping u guys are great i will highley reccomed
July 28, 2014
No fuss. No muss. Fits perfect. Easy installation. Drain down the old tank before you make the switch. That way, there's less fuel to transfer. Looks good after installation.
July 1, 2014
Looks much better than the faded and stained red one that was in there previously. Gas gauge is a little pessimistic. But that's OK. When you make the switch, run the gas down n the old one first. Transfer the remaining gas via a hand pump.
July 1, 2014
Installed easily would have like to seen indentation molded into tank so hose didn't pinch , pulled hose out of bilge
June 3, 2014
Great looking also had a great experience in doing business with JD
May 17, 2014
Great Product, easy to install.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.