Free shipping on orders over $99.99! Don't miss out!
$22.46 Out of Stock
Racor Turbine Series Replacement Diesel Fuel Filter Elements
$22.46Out of Stock
Racor Turbine Series Replacement Diesel Fuel Filter Elements
Ask a Question
3.13
Based on 3 Reviews
  • 5 Star

    33%

  • 4 Star

    33%

  • 3 Star

    0%

  • 2 Star

    0%

  • 1 Star

    33%

Racor Turbine Series Replacement Diesel Fuel Filter Elements Customer Questions and Answers

8 of 8 Questions

Question

Racor element filter PN 146 22 355, what type we have to buy?

Asked on 12/23/2014 by eriek hermawan

Top Answer

dear sir, we want to ask you a question, i need HYDRAULIC TANK BREATHER size 32mmX51mmX22mm. what type i have to choose? best regard

Answered on 03/09/2015 by eriek hermawan
See More Answers (3)

Answer

Follow the engine manufacturers specifications. Generally the 30 micron is used as a primary filter and then either a 2 or 10 micron as secondary. On the Cat 3056 I use the 2 micron filter as the secondary filter. Hope this helps.

Answered on 12/23/2014 by JAMES SUTTON

Answer

thanks ronald and james

Answered on 12/24/2014 by eriek hermawan

Answer

I never go smaller than 10 micron. Use 10 on both primary and secondary

Answered on 12/23/2014 by RONALD NORTON
Answer Question

Question

which is finer 30 micron or 10 micron ?

Asked on 07/13/2014 by Undisclosed

Top Answer

10 micron is finer, that is it filters smaller particles.

Answered on 07/14/2014 by Al Dukes
See More Answers (3)

Answer

10 micron is finer.

Answered on 07/13/2014 by JAMES SUTTON

Answer

I used the 10 micron Racor filter since that what wa recommended for my Cummins QSC diesel

Answered on 07/13/2014 by PAUL GUARRACINO

Answer

the number is the maximum particle size that will pass through the filter, so 10 micron is more fine than 30.

Answered on 07/14/2014 by COURT CROSBY
Answer Question

Question

how is inside plastic wheel with cup installed how does cup filter sit up or down ?

Asked on 08/29/2015 by Undisclosed

Top Answer

The plastic handle is up. Handle is used to remove old filter and install new. There are 2 rubber gaskets that are replaced. The large goes in the top of the filter housing and the small on the fuel love ne. The photo of the filter is the top, easy to see by the plastic handle on the side.

Answered on 08/30/2015 by HENRY KNOBLOCK
See More Answers (1)

Answer

The sediment housing sits down. There should be a small valve on to drain the sediment and any water out the bottom. The filter goes in the top.

Answered on 08/29/2015 by ROBERT FIELDS
Answer Question

Question

I HAVE ALWAYS BOUGHT THE 10 MICRON FILTER FOR MY RACOR 500 SERIES SYSTEM. IS THERE AN ADVANTAGE TO USING THE 30 OR 2 MICRON FILTER INSTEAD OF THE 10? SEEMS THAT THE 2 MICRON WOULD REMOVE MORE SEDIMENT/DEBRIS IN THE FUEL BEFORE THE ENGINE FILTER. TX JERRY

Asked on 04/29/2014 by Undisclosed

Top Answer

If you have a secondary filter at 2 microns, then you should not use a 2 micron filters in the Racor primary filter, as it creates additional work for the pump. Yanmar recommends 30 micron for the Racor Primary filters.

Answered on 08/29/2019 by anonymous
See More Answers (1)

Answer

My system uses racors as primary filters but has cartridge filters at 2 micron as secondaries. I mostly use 30 micron in the racors knowing any smaller particles will be trapped by the later filtering. The filters in the racors last longer at 30 microns but definitely filter better at 10 or even 2.

Answered on 04/29/2014 by Al Dukes
Answer Question

Question

What filter do I use in a 500FG2 filter housing?

Asked on 05/23/2012 by Undisclosed

Top Answer

if this is your only filter use a RAC-2010SMOR in thr first container and a RAC-2010TMOR in the second nearest the engine intake. if you have a pre-filter use RAC-2010TMOR & RAC-2010RMOR

Answered on 06/23/2012 by FARLEY CHARTERS
See More Answers (1)

Answer

There are 3 filter elements that fit the housing mentioned, depending on what particulate size you want to block, 3, 10, or 30 micron. Use the 2010 series element and choose. RAC-2010SMOR is the number for the 3 micron and can be found along with tghe others at: < a href="http://www.jamestowndistributors.com/userportal/show_product.do?pid=6433&familyName=Racor+Turbine+Series+Replacement+Diesel+Fuel+Filter+Elements" target="_blank">http://www.jamestowndistributors.com/userportal/show_product.do?pid=6433&familyName=Racor+Turbine+Series+Replacement+Diesel+Fuel+Filter+Elements< /a>

Answered on 05/23/2012 by Al Dukes
Answer Question

Question

draining contaminated diesel fuel from the bottom of filter after changing filter cartridge. Will draining will air get into the line? Should I drain first?

Asked on 04/05/2017 by George from annapolis MD

Top Answer

I would replace the filter first, run the engine so the filter is full of fuel, shut off, then drain the bottom of the filter. You can drain first but will need to manually refill the filter to the top before running the engine.

Answered on 04/05/2017 by JD Tech Team
Answer Question

Question

I am looking for Racor replacement filter 2040PM 10 micron?

Asked on 09/07/2014 by Pat Lawton

Top Answer

What is question

Answered on 09/07/2014 by ANTHONY QUATTRONE
Answer Question

Question

replacement diesel fuel filt. wix 33166 thinks ?

Asked on 03/05/2012 by Undisclosed

Top Answer

I don't think Wix 33166 is a replacement for the racor elements. The wix looks like a spin on with metal casing, whereas the racor is a non metal insert cartridge to be put into the racor housing.

Answered on 03/06/2012 by Al Dukes
Answer Question
1 of 1