By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
Does the 13 gal tank come with the fitting ready to clamp on a hose? Can the fitting be on top?
Asked on 06/26/2018 by Peachie from New Bern NCFittings do not come with the tank, but plugs come in the holes. Kits such as the one in the link below are very helpful in circumstances like yours to set it up with holes where you need them. https://www.jamestowndistributors.com/userportal/show_product.do?pid=51562&familyName=Todd+Water+Tank+Fitting+Relocation+Kit
Answered on 06/29/2018 by JD Tech AssociateSorry no tank does not come with fitting for hose to clamp onto, they are all threaded holesall one one end of the tanl, so the second question would depend on what you consider to be the top of the tank
Answered on 06/26/2018 by dvestal49Yes to both.
Answered on 06/26/2018 by calebclarkeNo. The 13 gallon tank comes with plugs. You would have to add a suction rod to put the fittings on top.
Answered on 06/26/2018 by jkitchens82I purchased the 6 gallon and it came with plugs for the holes but not fittings. Probably since hose sizes can vary so much. Simple pipe thread fittings found nothing special needed. My holes were on the sides.
Answered on 06/26/2018 by dmieropMy tank came with threaded holes on one end of the tank. In, Out and Vent. You supply the fittings. As the pier turns and the anchor drags
Answered on 06/26/2018 by bradbarcusWhat is the lead time on a custom tank? Would need two 15 gallon tanks with 1 1/4" fittings. One on each side of the tank.
Asked on 11/05/2014 by carlos cerveraVery good product ! Been using as water hold...,no problems of any kind
Answered on 11/07/2014 by JEFFREY SMITH2 weeks
Answered on 11/05/2014 by KENNETH AMARALwhat are the dimensions of your 15 gallon tank?
Asked on 02/09/2015 by chris Miller25"L x 11"W x 16"H
Answered on 02/10/2015 by Rick Whitewhere does the vented loop go on the head instilation?
Asked on 02/29/2012 by UndisclosedFor a direct overboard discharge head or a mascerator pump out you need a vented loop. To a holding tank the head discharge runs directly into the tank.
Answered on 05/29/2012 by ALAN ROBBINSBy signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy