This item is eligible for free shipping
This item will require additional time to ship
Attwood Thru-Hull Connectors are constructed from high impact rugged white plastic. They will not rust corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. Maximum hull thickness is 1-1/4in.
Not for below waterline use.
|Item #||Hose Size"||Stem"||Flange"||Hole"|
|ATT 38723||5/8in Straight||3-1/4in||1-1/4in||1-1/8in|
|ATT 38733||3/4in Straight||3-1/4in||1-1/4in||1-1/8in|
|ATT 38773||3/4in 90degree||3-1/4in||1-1/4in||1-1/8in|
|ATT 38743||1-1/8in Straight||3-1/4in||2-1/4in||1-3/8in|
|ATT 38791||1-1/8in 90degree||3-1/4in||2-1/4in||1-3/8in|
|ATT 38753||1-1/2in Straight||3-1/2in||3in||1-7/8-2in|
December 17, 2016
Haven't ordered one because there's not enough info on what size they are. I need an 1 1/2 on threaded end . And 1 1/8 on barbed end. Confused on how to order because of lack of info on what you are buying.
June 18, 2015
Attractive Accurate Well Made.
October 25, 2012
Product was used to add a drain to a humidifier holding tank so that the tank could be drained for easier removal. Drain was connected through a shut off valve to an existing 5/8 inch vinyl tube. Had to buy a neoprene washer to make it leak tight. Two humidifiers were modified and the total cost of the parts was less than $15 for each tank.