Free shipping on orders over $99.99! Don't miss out!
$8.08 In Stock
Martyr Rudder/Trim Tab Zinc Anodes
$8.08In Stock
Rudder and Trim Tab Zincs
Ask a Question
4.7
Based on 3 Reviews
  • 5 Star

    67%

  • 4 Star

    33%

  • 3 Star

    0%

  • 2 Star

    0%

  • 1 Star

    0%

Martyr Rudder/Trim Tab Zinc Anodes Customer Questions and Answers

2 of 2 Questions

Question

This is a pair correct?

Asked on 04/19/2016 by Undisclosed

Top Answer

Yes, there are two halves with a stainless steel nut and bolt to join them

Answered on 04/19/2016 by JOHN OBRIEN
See More Answers (6)

Answer

It's not really a pair. It's two pieces that make one unit.One piece goes on the bottom of the tap and the other goes on the top. So you would need to order two for your trim taps.

Answered on 04/19/2016 by JOHN PEREZ

Answer

I would describe the round zinc anodes as 2 halves. They can act as a sandwich when bolted to a metal trim tab, one half on the top and the other half on the bottom. Both would be exposed to the water. If they are used on a surface that is exposed only on one side to water, then you would only need to use one half of this zinc and bolt it to the water side, with the spare half stored and available for the next season.

Answered on 04/20/2016 by JEFF STEVENSON

Answer

Yes they are sold as a pair. They worked very well for me

Answered on 04/19/2016 by PETER FEAMSTER

Answer

I have a slip at yacht club,boats in vicinity have plug in sure power running all season, I use 3 zincs on prop shaft and rudder, also use a grooper zinc and have no problems with electrolysis.

Answered on 04/19/2016 by WILLIAM MCBRINE

Answer

yes

Answered on 04/19/2016 by ROBERT KARP

Answer

This is a pair good for each side of one rudder

Answered on 04/19/2016 by GERARD MC EVILLY
Answer Question

Question

Do these zincs include mounting screws?

Asked on 06/14/2013 by Jeff Jones

Top Answer

Yes.

Answered on 06/18/2013 by JOHN LAAG
See More Answers (3)

Answer

YES

Answered on 06/14/2013 by GEORGE BURGHARDT

Answer

No mounting screws. The zinc's require a mounting hole to be drilled in the trim tab to receive the zinc. the screw that attached the two sections is also the mounting screw to hold the zinc in place.

Answered on 07/17/2013 by BRUCE KELLY

Answer

Mine came with stainless steel allen head bolts with the nut mounted in the top half

Answered on 06/14/2013 by JOHN OBRIEN
Answer Question
1 of 1