This item is eligible for free shipping
This item will require additional time to ship
Tridentflex Water Hose is used in lieu of pipe for provides better and easier installations where tight spaces, movement and vibration are considerations. Made of heavy duty tube with wire between 2 plies of reinforcement for excellent flexibility and bend radius. Trident hose resists heat, ozone, and collapse. Use for engine intakes, coolant, sanitation uses, scupper lines, bilge discharge and baitwells.
| Item # | I.D." | O.D" | Burst# | Length' |
|---|---|---|---|---|
| TRC 10001241B | 1/2in | 7/8in | 300lbs | 12-1/2ft. |
| TRC 1000126 | 1/2in | 7/8in | 300lbs | 50ft |
| TRC 10005841B | 5/8in | 1in | 300lbs | 12-1/2ft |
| TRC 1000586 | 5/8in | 1in | 300lbs | 50ft |
| TRC 10003441B | 3/4in | 1-7/64in | 300lbs | 12-1/2ft |
| TRC 1000346 | 3/4in | 1-7/64in | 300lbs | 50ft |
| TRC 10007841B | 7/8in | 1-7/32in | 250lbs | 12-1/2ft |
| TRC 10010041B | 1in | 1-11/32in | 250lbs | 12-1/2ft |
| TRC 1001006 | 1in | 1-11/32in | 250lbs | 50ft |
| TRC 10011841B | 1-1/8in | 1-15/32 | 250lbs | 12-1/2ft |
| TRC 10011441B | 1-1/4in | 1-5/8in | 200lbs | 12-1/2ft |
| TRC 1001146 | 1-1/4in | 1-5/8in | 200lbs | 50ft |
| TRC 10013841B | 1-3/8in | 1-47/64in | 190lbs | 12-1/2ft |
Reviews for Tridentflex Water Hose
November 26, 2019
Verified Purchase
I am replacing hose that is nearly 30 years old with this hose. The quality looks very good but the qualities that make the hose strong and durable also make it a bear to push on over barbed fittings. My mistake may have been trying to install it on a somewhat cold day and I could not push it on the manifold far enough to get two clamps on it. I will try again after warming it with a hair dryer with hopes that I can make it a bit more flexible and push it on further. Time from shipping to receipt was excellent.
Was this review helpful to you?
September 24, 2010
I bought a vetus raw water inlet strainer and needed hose to run from the thru hull to the strainer and then to the engine. Used double clamps at the tru hull and strainer inlet. Single clamps from strainer (above water line) to the engine.
Was this review helpful to you?
By signing into your account, you represent that you have read and agree to our Terms and our Privacy Policy
