Get Free Shipping on your order now! Don't miss out!
Quantity
1 ea contains 1 ea

This item is eligible for free shipping

Product Details

Epifanes epoxy primer is a two-part primer with excellent adhesion and filling properties. May be used above or below the waterline. Provides a hard, strong base for the application of Epifanes Polyurethane Coatings. Epoxy Paint primer can be used on plywood and fiberglass, as well as an anti-rust primer in a two-component paint system on steel and aluminum.

Info & Guides

    Technical Specifications

  • Container Size: 750 ml. (100 parts comp. A to 14 parts comp. B by weight).
  • Color: White
  • Gloss: Semi Gloss
  • Density: 1.82 kg/liter (mixed)
  • Solids Content : 50 +/- 2 vol. %
  • Drying times at 65F / 65% RH: Tack free - 12 hours / Full Cure - 7 hours Dust Free - 45 min / Recoatable - 12 hours
  • Recommended Film Thickness: Per coat wet - 80 micron / Per coat dry - 40 micron
  • Application: Brush, roller, conventional air spray, H.V.L.P.
  • Temperature should be between 50 degrees F and 85 degrees F during application with the air humidity level below 85 percent. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability.

Reviews for Epifanes Epoxy Primer

2 of 2 Reviews

November 13, 2022

Cannot purchase hardener
By Rmb from Ma

Verified Purchase

I have used this two part primer several times with good results. Somehow with my most recent purchase I somehow lost the hardener ( part B) after using a very small amount of primer. I contacted Epifanes to see if they would sell me just part B. No luck now I am stuck with a mostly full can . Going in the trash.


Was this review helpful to you?

February 15, 2022

Great product!
By Mike from Massachusetts

Verified Purchase

Primer worked great. I would use it again.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?